JST Posted December 3, 2005 Share Posted December 3, 2005 Any recommendations for a firm that specialises in the FIP setups, or for refurbing injectors? (60k miles, 200tdi def) Mine has started using alot more fuel than normal and smokes (black) alot when labouring after standstill eg coasting to a near stop at a jct then pulling away in 2nd whilst still rolling = quite a bit of black smoke. struggles to hold higher speeds as well, more so than used to. impg also about 21 down from 26 avg. so something def up. any recommendation or checks i could do? Quote Link to comment Share on other sites More sharing options...
will_warne Posted December 3, 2005 Share Posted December 3, 2005 It sounds like your fueling's out. Sound VERY simerlar to what happened to my winch bi*ch's Tdi Golf. Basicly the bottom end bearings went allowing the crank to wobble about ant the cam belt to skip a couple of teeth. When was the cam belt last done? I've heard of the belts on 200s rotting and then loosing their teeth. Quote Link to comment Share on other sites More sharing options...
SiWhite Posted December 3, 2005 Share Posted December 3, 2005 There's a great place in newbury - not a million miles from LAND. Quote Link to comment Share on other sites More sharing options...
western Posted December 3, 2005 Share Posted December 3, 2005 (edited) these from Yell.com Taunton --- I used 'fuel imjection' for this result Chris White Engineering Unit 1, Hugo St, Taunton, Somerset TA1 1 Tel: 01823 332943 used diesl injection for these below --------------- Exeter Electro-Diesel (RCJ) Ltd 4 Goshawk Units, Osprey Rd, Sowton Industrial Estate, Exeter, Devon EX2 7JG Tel: 01392 208090 Cowick Fuel Injection Services 18 Norman Court, Budlake Rd, Marsh Barton, Exeter, Devon EX2 8PY Tel: 01392 276664 Honiton Diesel Injection Services (Devon) Ltd Reme Drive, Heathpark Industrial Estate, Honiton, Devon EX14 1SE Tel: 01404 47919 I've a good one in Helston, but their over 100miles from you. Edited December 3, 2005 by western Quote Link to comment Share on other sites More sharing options...
JST Posted December 3, 2005 Author Share Posted December 3, 2005 Ralph, many thanks i will give them a ring mon see how far i get. Will - i am hoping not, LR serviced and cam belt changed 20k ago (3yrs) Si - a little to far i feel! Thanks for the responses guys. Quote Link to comment Share on other sites More sharing options...
TJ101 Posted December 3, 2005 Share Posted December 3, 2005 James Try one of Ralph's finds Exeter Electro-Diesel (RCJ) Ltd 4 Goshawk Units, Osprey Rd, Sowton Industrial Estate, Exeter, Devon EX2 7JG Tel: 01392 208090 Speake to Ray, and mention my name,,, !! Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted December 3, 2005 Share Posted December 3, 2005 My bus company use the Lucas main dealer in Lawrence Hill, Bristol - I can get a contact name there if you like? Quote Link to comment Share on other sites More sharing options...
honitonhobbit Posted December 3, 2005 Share Posted December 3, 2005 Any recommendations for a firm that specialises in the FIP setups, or for refurbing injectors? (60k miles, 200tdi def)Mine has started using alot more fuel than normal and smokes (black) alot when labouring after standstill eg coasting to a near stop at a jct then pulling away in 2nd whilst still rolling = quite a bit of black smoke. struggles to hold higher speeds as well, more so than used to. impg also about 21 down from 26 avg. so something def up. any recommendation or checks i could do? There is a place in Ex Eat ERR pm for the number of a bloke who knows - or find it yourself Bugger Tim, as always has beaten me to it... It's because I am having a wake - by myself Quote Link to comment Share on other sites More sharing options...
selectcase Posted December 4, 2005 Share Posted December 4, 2005 Hickley valtone are good and have depots in taunton and bridgwater Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.