white90 Posted April 19, 2006 Share Posted April 19, 2006 my D2 front prop has given up the ghost the uj's on the double end had died. I'm thinking of sending it to: The Propshaft Clinic in Bradford anyone recommend them? if not any suggestions please TIA Quote Link to comment Share on other sites More sharing options...
SteveG Posted April 19, 2006 Share Posted April 19, 2006 I've seen their custom work recommended on a number of boards. How long did it last Tony? Just interested out of curiosity. Cheers Steve Quote Link to comment Share on other sites More sharing options...
white90 Posted April 19, 2006 Author Share Posted April 19, 2006 purchased 2nd hand from a board user so of unkown age/mileage approx 10k and 8months th eproblem is you can not grease the double joint UJs the front UJ is like new still Quote Link to comment Share on other sites More sharing options...
will_warne Posted April 19, 2006 Share Posted April 19, 2006 Tony, I can't rate them more highly. They ususally have a 24h turn arround but the last time I delt with them they were very busy (told me 10 days for a propshaft). I said I was pretty desperate to have it within 72 hours and so they gave the components to one of their rivals and the propshaft was with me within 48 hours. Exeptionally well priced too; they beat everyone by £50+ and knew exactly what they were talking about when I called as well as selling me what I wanted not what they wanted to sell. Quote Link to comment Share on other sites More sharing options...
BogMonster Posted April 19, 2006 Share Posted April 19, 2006 The D2 props fail like this a lot, we have replaced several at work, though my own one is still hanging in there. Due to the stupidly high cost of a new one (£450 or something silly ) a bit of experimentation meant we found that an ordinary 300Tdi Defender 110 one will fit, if you change the t/box flange as well, and this is much cheaper! No sign of any driveline vibrations at our road speeds with this mod, not sure what it would be like on a motorway though. IIRC you can get replacement double joint UJs, it is the jointy bit between the two UJs at the double end that packed up as it cannot be lubricated. Quote Link to comment Share on other sites More sharing options...
honitonhobbit Posted April 19, 2006 Share Posted April 19, 2006 Excellent company - talk to Peter Quote Link to comment Share on other sites More sharing options...
freeagent Posted April 19, 2006 Share Posted April 19, 2006 prop shaft clinic are brill. the new prop i bought for my 110 was a little dearer than an 'addocks cheapie.. but the build quality puts the genuine part ones to shame... top blokes. Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted April 20, 2006 Share Posted April 20, 2006 If you're going to change it anyway, can you get a lubricatable(!) one? It's not good to hear though, seems the universal fix for prop vibrations isn't without drawbacks... Quote Link to comment Share on other sites More sharing options...
white90 Posted April 20, 2006 Author Share Posted April 20, 2006 Thanks for the positives everyone! John I'm having it rebuilt with fully greaseable/serviceable parts. The prop as I said was of unkown vintage but was fine. since then it has: been to Belguim/Slindon/Exmoor laning/ruggaton Farm and approx 8k of road work. I regularly greased the front UJ and it is still fine the double end I just washed off and gave it a good looking at as I couldn't do anything else. So a new one may well last a a lot longer. D90SV (Jim) told me they've had early life failures on D2's that don't go offroad at all so I'm not too worried. The Propshaft clinic will sort it and I'll see how long it lasts this time as it will be like a new one. For the Record D44 can get the double end UJ's for £20+vat Quote Link to comment Share on other sites More sharing options...
Les Henson Posted April 20, 2006 Share Posted April 20, 2006 I can't see the point in uj's that can't be re-greased, surely you start the clock ticking as soon as you fit the thing. I bought a couple of UJ's from BLRS a year or so ago, and the box looked to all intents and purposes a Hardy Spicer item. The contents were uj's that couldn't be re-greased, and were a blatant copy of a known quality part. Les. Quote Link to comment Share on other sites More sharing options...
Kev Baldwin Posted April 20, 2006 Share Posted April 20, 2006 No problems with Propshaft Clinic Tony. Go for it. Although not the cheapest place in the world, they know their stuff and will do a good job. Every racer & modifier up t'north sends their stuff there so they know LR's. I also understand they make up all the props for Gone2Far. At least that's what they told me. Kev Quote Link to comment Share on other sites More sharing options...
white90 Posted April 20, 2006 Author Share Posted April 20, 2006 cheers Kev I'm glad to hear they are a decent company, they certainly sounded fine on the phone. all wrapped and posted to them this am, so hopefully I'll have it back next week some time. Quote Link to comment Share on other sites More sharing options...
Bush65 Posted April 20, 2006 Share Posted April 20, 2006 I can't see the point in uj's that can't be re-greased, surely you start the clock ticking as soon as you fit the thing. I bought a couple of UJ's from BLRS a year or so ago, and the box looked to all intents and purposes a Hardy Spicer item. The contents were uj's that couldn't be re-greased, and were a blatant copy of a known quality part.Les. Les, your looking from a different point than rover Quote Link to comment Share on other sites More sharing options...
BogMonster Posted April 20, 2006 Share Posted April 20, 2006 I can't see the point in uj's that can't be re-greased, surely you start the clock ticking as soon as you fit the thing. I bought a couple of UJ's from BLRS a year or so ago, and the box looked to all intents and purposes a Hardy Spicer item. The contents were uj's that couldn't be re-greased, and were a blatant copy of a known quality part.Les. Neither can I Les but it is the way most things are going these days. I don't think you will find grease nipples on most propshafts and things these days. "Sealed for life" usually means "Sealed for a shorter life...". Having said that some "sealed for life" items (Discovery 2 or Freelander wheel bearings for example) seem to last much better than any of the old ones that could be periodically serviced so I don't know really! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.