SpenB Posted May 24, 2012 Share Posted May 24, 2012 Morning all, I am starting a rebuild of my 91' 200Tdi Defender. I will be running Disco 300TDI axles once i have rebuilt these too. I will apologise now for any stupid posts and stupid questions that I will be asking from now on. I have never done anything like this and any advice or help would be greatly accepted. Thanks in advance. Spen Quote Link to comment Share on other sites More sharing options...
Maverik Posted May 24, 2012 Share Posted May 24, 2012 A wee tip... Silly question avoidance technique.. read lots and lots and lots about as much as you can google, then ask the questions - its easy don;t worry Quote Link to comment Share on other sites More sharing options...
Quagmire Posted May 24, 2012 Share Posted May 24, 2012 Like Maverik says - search first, otherwise you risk Fridge coming along and reminding you . Other than that, no such things as silly questions, just silly answers (and we do get them from time to time even on here). Quote Link to comment Share on other sites More sharing options...
Quagmire Posted May 24, 2012 Share Posted May 24, 2012 Also- for part numbers and such (as per your caliper thread) its probably worth downloading the landrover parts software "microcat" that way you can pop in the appropriate vin, or model year and get the right part numbers... Hosted by Mr Retroanaconda with instructions here: http://www.retroanac...-november-2009/ Quote Link to comment Share on other sites More sharing options...
CwazyWabbit Posted May 24, 2012 Share Posted May 24, 2012 Most important thing though, start a build thread in the members vehicles section. We all like a good read, with plenty of pictures Quote Link to comment Share on other sites More sharing options...
Landy'd Gentry Posted May 24, 2012 Share Posted May 24, 2012 Also- for part numbers and such (as per your caliper thread) its probably worth downloading the landrover parts software "microcat" that way you can pop in the appropriate vin, or model year and get the right part numbers... Hosted by Mr Retroanaconda with instructions here: http://www.retroanac...-november-2009/ Microcat is a godsend! Also the technical section on the forum with index is priceless. Best of luck with the build! Quote Link to comment Share on other sites More sharing options...
Oakmaster Posted May 24, 2012 Share Posted May 24, 2012 Welcome - dont worry too much about posting seemingly silly questions, Ive asked a few and have I've been tolerated well (so far!) - I hadden't seen the good advice posted above, and in future I shall do some research prior to posting 'dumb' questions. the main thing is show the appropriate degree respect to those who give freely of their time to help us. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted May 24, 2012 Share Posted May 24, 2012 Like Maverik says - search first, otherwise you risk Fridge coming along and reminding you . I'm sure I don't know what you mean Good luck with the build! Quote Link to comment Share on other sites More sharing options...
jbs Posted June 6, 2012 Share Posted June 6, 2012 And we also need in-depth reports on your injuries too-ala JeffR/HFH John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.