bernie Posted November 26, 2013 Share Posted November 26, 2013 Would a transfer box that was original fitted to a LT77 fit an R380 Quote Link to comment Share on other sites More sharing options...
reb78 Posted November 26, 2013 Share Posted November 26, 2013 Yep. Quote Link to comment Share on other sites More sharing options...
ejparrott Posted November 26, 2013 Share Posted November 26, 2013 yup Quote Link to comment Share on other sites More sharing options...
western Posted November 26, 2013 Share Posted November 26, 2013 yes straight fit. Quote Link to comment Share on other sites More sharing options...
Gazzar Posted November 27, 2013 Share Posted November 27, 2013 Assuming it's the LR version of a R380, yes. Quote Link to comment Share on other sites More sharing options...
bernie Posted November 27, 2013 Author Share Posted November 27, 2013 Been offered a early 110 transfer box that was original fitted to a lt77, and when removed had only covered 67000 miles. I will renew gaskets,and check bearings etc. Many thanks for the info guys, Quote Link to comment Share on other sites More sharing options...
miketomcat Posted November 27, 2013 Share Posted November 27, 2013 Just check the ratio as early 110's had a 1.67:1 not the more common 1.41:1 and 90's had a 1.44:1 Quote Link to comment Share on other sites More sharing options...
Ex Member Posted November 27, 2013 Share Posted November 27, 2013 They also were prone to input spline wear, so have a good look at the input splines. Keep in mind that it may get wear in the future unless you upgrade the input gear. Quote Link to comment Share on other sites More sharing options...
reb78 Posted November 28, 2013 Share Posted November 28, 2013 45 quid for the gear, plus the bearings sorts that. (less if you want the spare that I have sat in the garage) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.