Stellaghost

Are you sure there is not an "in" to be added in there somewhere........ Regards Stephen

There's only one madman here, me working out in -8..... Regards Stephen

I think so, also totally unaware you could get heated windscreen for series vehicles regards Stephen

I see where your going, the heat is not great but it is enough to keep the Windows defrosted, especially in the present conditions This will be where you tell me you don't have a heater cos it's too heavy for the little green thing...... Lol regards Stephen

How long since you had a lightweight.........lol There is a flat heater in front of that pile of gubbins on the floor that will be fitted regards Stephen

Spent the morning freezing my you know what's off stripping everything I need from the bulkhead Can honestly say I'm not looking forward to sorting this lot out especially the electrics ( I have an abject fear of electrics) but it needs to be done...... regards Stephen

Just weighed my stripped down lightweight bulkhead 26kg so not that much difference regards Stephen

You know its cold when your winch rope is frozen in place..... regards Stephen

This one on eBay at the moment £150 + £15 postage Ouch .......Regards Stephen

Agreed, for that sort of money you could buy new sides, have a tub folded and put it together yourself, let's be right, after about 12 months use they would end up looking the same I reckon regards Stephen

Must admit I've always had excellent results when I've used JB weld regards Stephen

Around 4" regards Stephen

Forgot to mention battery box also fixed into position regards Stephen

If that was mine I would be delighted with it regardless Brilliant work regards Stephen

You need to be sitting down when you view the price list, more expensive than a galvanised chassis !!! Regards Stephen

Thanks Bit of a false impression when your looking at it, body and chassis raised at the moment ( note the trolley jack at the nearside bumper end ) to level things out, also a 5" drop over standard axle due to the portals , hence seeing more of the spring. Springs are 1" lower than standard where as springs were + 2" prior to portal conversion regards Stephen

That's it for today, toes are dropping off lol Seat box fitted, tank Bolted up wings fitted and bonnet tried on for fit oh also trimmed rear crossmember with my new bandsaw bonnet hinges OK now since altered Regards Stephen

Bit chilly working outside today but needs must and all that... highly likely I'm going to miss that " before winter sets in deadline" regards Stephen

My floor standing bandsaw converts to vertical with a vice mounted table I made, very quickly and easily regards Stephen

Yes coloured with heat regards Stephen

I guess I like the coloured one better, probably helps that I got the feather lines finer, did the non coloured with a chisel and the coloured one with a sharpened scotching hammer regards Stephen

The one I'm using is from Mr bandsaw, not a Milwaukee blade On a different note I fitted a new axminster blade to my other bandsaw and it snapped 30 seconds in, this will be the 3rd axminster blade that's done that, I will weld it back together as I have before and get more use out of it regards Stephen

Opinions required gentlemen , if you don't mind of course So I mentioned I was going to try and make some angel wings for my good lady ( she is unaware of this ) I've made a couple of feathers, one coloured with heat one not, what do you guys think ? Go with it or just forget about it The plan is to join them together like So obviously I have lots to make in various sizes, what do you think yay or nay TIA regards Stephen

What's quite surprising about this bandsaw is that it cuts way faster than my Axminster floor standing one ????? Regards Stephen

Finally a dry day so I can get my welder outside Fuel tank outriggers sorted also got harness brackets sorted so I can think about finishing seatbox regards Stephen