Bowie69 Posted December 2, 2022 Share Posted December 2, 2022 'Torques' via Ebay: https://www.ebay.co.uk/str/torquesuk?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tOCniKdHRWG&sssrc=3418065&ssuid=AFY_9vavSse&widget_ver=artemis&media=COPY 1 Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted December 2, 2022 Share Posted December 2, 2022 And a link to my post about PAS lines: 1 Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 2, 2022 Share Posted December 2, 2022 On 11/27/2022 at 9:36 PM, Stellaghost said: All help gratefully received regards Stephen Sorry it’s taken a while Stephen! The twist in the panhard isn’t as bad as I’d remembered! I didn’t get chance to measure it, but I’d guess a worst of maybe 5-6deg each end? 1 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 2, 2022 Author Share Posted December 2, 2022 2 minutes ago, Bowie69 said: And a link to my post about PAS lines: I had found it but this will make it quicker to find thank you regards Stephen Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 2, 2022 Author Share Posted December 2, 2022 2 minutes ago, landroversforever said: Sorry it’s taken a while Stephen! The twist in the panhard isn’t as bad as I’d remembered! I didn’t get chance to measure it, but I’d guess a worst of maybe 5-6deg each end? That's brilliant Ross, at least I've got some numbers to work with thank you very much regards Stephen Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 2, 2022 Share Posted December 2, 2022 Just now, Stellaghost said: That's brilliant Ross, at least I've got some numbers to work with thank you very much regards Stephen No worries! I reckon if you've got ~20Deg of movement in the rosejoint you should be ok! Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 2, 2022 Share Posted December 2, 2022 Just now, landroversforever said: No worries! I reckon if you've got ~20Deg of movement in the rosejoint you should be ok! Thinking about it.... might want to check it with the axle dropped all the way down on both sides. Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 2, 2022 Author Share Posted December 2, 2022 9 hours ago, landroversforever said: Sorry it’s taken a while Stephen! The twist in the panhard isn’t as bad as I’d remembered! I didn’t get chance to measure it, but I’d guess a worst of maybe 5-6deg each end? Just looking at this again, pretty sure your pan hard rod is fitted the wrong way around...lol regards Stephen 1 1 Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted December 3, 2022 Share Posted December 3, 2022 Erm, yup! Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 3, 2022 Share Posted December 3, 2022 It is, and I did know Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 3, 2022 Author Share Posted December 3, 2022 1 hour ago, landroversforever said: It is, and I did know Yeah, yeah, yeah Ross, of course we would all say that............lol Regards Stephen Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 3, 2022 Share Posted December 3, 2022 1 hour ago, Stellaghost said: Yeah, yeah, yeah Ross, of course we would all say that............lol Regards Stephen I threw it on and then cursed when it hit the new diff pan… then realised it was the wrong way round Quote Link to comment Share on other sites More sharing options...
Popular Post Stellaghost Posted December 5, 2022 Author Popular Post Share Posted December 5, 2022 Started making new floor plates this morning Part I made out of steel some time ago, will re-make in aluminium at some point but not now will totally need to reconfigure tunnel section as it's a poor fit at the moment, mind it never was great... lol Regards Stephen 5 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 5, 2022 Author Share Posted December 5, 2022 Some adjustments made to the pan hard rod due to mog diff centre being different from landrover diff centre will probably still need a wee bit of fine tuning , will see what it's like in the morning once home regards Stephen 2 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 6, 2022 Author Share Posted December 6, 2022 My future shelves........ I mean mud guards....lol Regards Stephen 2 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 7, 2022 Author Share Posted December 7, 2022 Lots of little llama pipes through the post today Regards Stephen 4 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 7, 2022 Author Share Posted December 7, 2022 Wish these discs were available 20 yrs ago remove paint exceptionally well, obviously this car will not have a mirror glaze finish......... before paint removal Paint removal, not worried about the odd bit left, it's going to be brush painted after all, also not even going to take all the dings out, just more about removing loose paint Primed All I had time for as on nightshift regards Stephen 3 Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 7, 2022 Share Posted December 7, 2022 I read that as 'time on nightshift' Quote Link to comment Share on other sites More sharing options...
Stinkfloyd Posted December 7, 2022 Share Posted December 7, 2022 2 hours ago, Stellaghost said: All I had time for as on nightshift The workshop is free on nightshifts 😁 that is if you're not too busy waiding with the pickups 😉 Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted December 8, 2022 Share Posted December 8, 2022 14 hours ago, Stellaghost said: Paint removal, not worried about the odd bit left, it's going to be brush painted after all, also not even going to take all the dings out, just more about removing loose paint I swear people who take dings out of Land Rover bodywork are a special kind of daft... and ones who smooth them over with filler are even worse. 1 1 1 Quote Link to comment Share on other sites More sharing options...
miketomcat Posted December 8, 2022 Share Posted December 8, 2022 10 hours ago, FridgeFreezer said: I swear people who take dings out of Land Rover bodywork are a special kind of daft... and ones who smooth them over with filler are even worse. I seem to go to great lengths to put them in mine. Mike 1 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 8, 2022 Author Share Posted December 8, 2022 11 hours ago, FridgeFreezer said: a special kind of daft I've been called worse............lol Regards Stephen Quote Link to comment Share on other sites More sharing options...
Popular Post Stellaghost Posted December 9, 2022 Author Popular Post Share Posted December 9, 2022 Finally a dry day so I can get my welder outside Fuel tank outriggers sorted also got harness brackets sorted so I can think about finishing seatbox regards Stephen 6 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 11, 2022 Author Share Posted December 11, 2022 Bit chilly working outside today but needs must and all that... highly likely I'm going to miss that " before winter sets in deadline" regards Stephen Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted December 11, 2022 Author Share Posted December 11, 2022 That's it for today, toes are dropping off lol Seat box fitted, tank Bolted up wings fitted and bonnet tried on for fit oh also trimmed rear crossmember with my new bandsaw bonnet hinges OK now since altered Regards Stephen 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.