henk Posted May 8, 2023 Share Posted May 8, 2023 I can buy a front axle of a 1994 RRC with vented discs and the wider front radius arms but has it a 24 spline diff or not? Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted May 8, 2023 Share Posted May 8, 2023 *maybe* I say that becuae by then they were using whatever they had to hand. I'd say maybe 65% chance it is 24 spline, only one way to truly find out. Quote Link to comment Share on other sites More sharing options...
miketomcat Posted May 8, 2023 Share Posted May 8, 2023 As Bowie says, I've had three 93 Discovery's all 200tdi two had twenty four, one had ten. Mike Quote Link to comment Share on other sites More sharing options...
Wytze Posted May 8, 2023 Share Posted May 8, 2023 The drive flange should be a good indication, should it not? Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted May 8, 2023 Share Posted May 8, 2023 They all had the thin drive flange by that age. Quote Link to comment Share on other sites More sharing options...
Wytze Posted May 8, 2023 Share Posted May 8, 2023 28 minutes ago, Bowie69 said: They all had the thin drive flange by that age. Ah, so.. No,then😁 Quote Link to comment Share on other sites More sharing options...
Snagger Posted May 10, 2023 Share Posted May 10, 2023 It will have been built with a 24 spline diff, but who knows what has been done since. Retrofitting a 10 spline diff would not be easy or cost effective and only has drawbacks, so it is unlikely to have been altered. Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted May 10, 2023 Share Posted May 10, 2023 both cheesey. 10 or 24 spline 2 pin, the 24 slighly more cheddar than 10 spline cottage :rofl:, but yes should be 16mm centre pinned 24 spline 3.54 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.