Chicken Drumstick Posted April 28 Share Posted April 28 Does anyone know if you can buy the rubber insert that goes inside the transfer box gear knob? Mine has decided to turn into a waxy material and come off when you try and select low. Thanks. Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted April 28 Share Posted April 28 I couldn't find one when mine fell apart, I took the opportunity to buy one of the retro coloured ones you can get on Ebay.... 2 Quote Link to comment Share on other sites More sharing options...
miketomcat Posted April 29 Share Posted April 29 I filled mine with epoxy and re drilled/tapped it. I did use a Dremel to roughen the inside first. Mike 1 Quote Link to comment Share on other sites More sharing options...
western Posted April 30 Share Posted April 30 Mike on Britannic Restorations on youtube has a video on how to fit a steel nut inside the gear knobs, 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Sigi_H Posted May 8 Popular Post Share Posted May 8 Just put oil on the thread of the leaver and fill little epoxy into the knob. Put it over and the epoxy will make no contact to the thread, but takes the form of it. 3 2 Quote Link to comment Share on other sites More sharing options...
Junglie Posted May 9 Share Posted May 9 On 5/8/2024 at 8:16 AM, Sigi_H said: Just put oil on the thread of the leaver and fill little epoxy into the knob. Put it over and the epoxy will make no contact to the thread, but takes the form of it. That's bloody genius! So obvious but I'd never have thought of it... Quote Link to comment Share on other sites More sharing options...
Steve Marquis Posted May 10 Share Posted May 10 How timely is that, mine's just parted company with the stick, I'm off to buy some epoxy 😊 1 Quote Link to comment Share on other sites More sharing options...
stevebus Posted May 11 Share Posted May 11 Glad you seen fit to join this forum Mr Marquis, you'll find some clever so n so's on here, hope the new edition is all going well fella 1 Quote Link to comment Share on other sites More sharing options...
Steve Marquis Posted May 11 Share Posted May 11 Yes, thanks @stevebus I'm enjoying getting used to the ratios and wheelbase. It's a very different beast! 😊 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.