nige90 Posted April 4, 2007 Share Posted April 4, 2007 As I've so far failed in the mission to find the Holy Grail of 2nd hand Landy parts, The Rustless Doors, I decided to repair the ones I have. Locked myself in the garage for a while and made a couple of bottom channel sections and bob's whatever. Quote Link to comment Share on other sites More sharing options...
vinny Posted April 4, 2007 Share Posted April 4, 2007 I did somthing similar with mine but nowhere near as tidy!!! I used stainless steel box section and some stainless plate to repair mine! 2mm plate for the skin to fold around. 25 / 30mm box for the base and two lengts(300mm) of 20mm box pushed up into the remainder of the door frames. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted April 4, 2007 Share Posted April 4, 2007 On the "to do" list for the 109 is to make some better doors, is there any reason not to use a nice bit of extruded ali for this? Quote Link to comment Share on other sites More sharing options...
Tonk Posted April 4, 2007 Share Posted April 4, 2007 i thought u could buy the official repair section for doors then just chop it to length? Quote Link to comment Share on other sites More sharing options...
Jon White Posted April 4, 2007 Share Posted April 4, 2007 You can buy the repair section for series doors which works very well and is the easiest way to fix series doors. You cant buy the correct pattern for defender doors as its a different profile. However the series one is near enough and I've repaired the defender doors on my truck using the series sections. When the door trims are on its pretty much indistinguishable from the correct part! Jon Quote Link to comment Share on other sites More sharing options...
Paul Humphreys Posted April 4, 2007 Share Posted April 4, 2007 You can buy the repair section for series doors which works very well and is the easiest way to fix series doors.Jon http://www.yrm-metal-solutions.co.uk/ Paul Quote Link to comment Share on other sites More sharing options...
Jon White Posted April 5, 2007 Share Posted April 5, 2007 Sigh........... Quote Link to comment Share on other sites More sharing options...
LR90 Posted April 5, 2007 Share Posted April 5, 2007 Some useful parts there. Thanks for the link Paul. Quote Link to comment Share on other sites More sharing options...
88 Special Posted April 6, 2007 Share Posted April 6, 2007 Freight prices to Panama are very high, so I rebuilt my SIII door/window frames out of 1mm galvanized. Test bend , next to old frame, Made a new handle box on the right side. New parts. Piece for the window frame Repaired door. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted April 6, 2007 Share Posted April 6, 2007 Wow, that's some smart work! B) Quote Link to comment Share on other sites More sharing options...
nige90 Posted April 6, 2007 Author Share Posted April 6, 2007 Streuth 88, make me look like a botcher why don't you Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted April 7, 2007 Share Posted April 7, 2007 Very nice work 88, I take it that with the moist , warm climate in Panama unprotected steel rusts pretty quickly ? Mo Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted April 7, 2007 Share Posted April 7, 2007 Very nice work 88, I take it that with the moist , warm climate in Panama unprotected steel rusts pretty quickly ? Given how well those rust in the moist, cold climate of the UK I would've though Galv would be the material of choice wherever it was available I still fancy having a go with extruded ali though. Quote Link to comment Share on other sites More sharing options...
88 Special Posted April 7, 2007 Share Posted April 7, 2007 Very nice work 88, I take it that with the moist , warm climate in Panama unprotected steel rusts pretty quickly ?Mo Thank you, and yes, with the high humidity (80-90% in the rainy season) and living a couple miles from the ocean, bare steel does not last long. Galvanized is better, and I had it on hand. Aluminum would not rust, but I am using a stick welder. Quote Link to comment Share on other sites More sharing options...
callum Posted April 7, 2007 Share Posted April 7, 2007 Thank you, and yes, with the high humidity (80-90% in the rainy season) and living a couple miles from the ocean, bare steel does not last long. Galvanized is better, and I had it on hand. Aluminum would not rust, but I am using a stick welder. how do you work with such thin sheet with the stick welder? i use a stick welder, but find that 1.6mm sticks on 1.6mm steel is about the limit, with the power wound down as far as it will go. can you use thinner sticks or something to prevent blowing holes? even with 1.6 you have to go pretty fast to avoid blowing holes. maybe something is wrong with my technique. what did you use for your bulkhead? i remember reading your thread on the lruk forum a few years ago, but i cant remember much really. Quote Link to comment Share on other sites More sharing options...
88 Special Posted April 7, 2007 Share Posted April 7, 2007 how do you work with such thin sheet with the stick welder?i use a stick welder, but find that 1.6mm sticks on 1.6mm steel is about the limit, with the power wound down as far as it will go. can you use thinner sticks or something to prevent blowing holes? even with 1.6 you have to go pretty fast to avoid blowing holes. maybe something is wrong with my technique. what did you use for your bulkhead? i remember reading your thread on the lruk forum a few years ago, but i cant remember much really. I use 3/32" rod (smallest available in Aguadulce) and 40 or 60 amps. I make some holes, have you tried different angles? When welding heavier steel I weld left to right with the rod at about 45-60º, on the thin stuff I use 20-30º almost paralled to the piece. Checked the door frame metal, it is .050"- 1.25mm, I put backing pieces inside the corners of the door frames and plug welded the flat strips to the profile piece. The bulkhead was .062" galvanized, and it has a few extra holes. When welding thin, I usually practice awhile on some scrap. Quote Link to comment Share on other sites More sharing options...
88 Special Posted April 7, 2007 Share Posted April 7, 2007 Streuth 88, make me look like a botcher why don't you Sorry, yours is as good as mine, I just put some new paint on top! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.