pete300tdi90 Posted August 25, 2010 Share Posted August 25, 2010 Hey, Looking at getting some 35 inch tyres, maybe, and wondering, what is the narrowest rim they will fit on? do they all come 12.5 wide, or can you get 10.5 wide? I know people say you cant sqeeze tyres onto narrow rims, but thats just not true, but how far can you go? will a 12.5' wide tyre fit a 7' wide rim? Thanks, Pete Quote Link to comment Share on other sites More sharing options...
Def V8 90 Posted August 25, 2010 Share Posted August 25, 2010 for 35s you'll need 2" lift (min) for 12.5s you'll need minimum of 30mm spacers to maintain decent lock / prevent too much rubbing i have had kumho (or marshall) KL71s, pretty good off road, reasonable in mud, quite civilised on-road lots of choice including road-biased A/T all the way up to swampers in fairness there is a lot on google too!!! Quote Link to comment Share on other sites More sharing options...
jcwcooper Posted August 25, 2010 Share Posted August 25, 2010 You can get some 35s in 10.5" like simex but most seem to be 12.5" As for rim size I don't think 35x12.5s on a 7" rim would be the best of ideas. Also steering lock would be useless! Dave Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 25, 2010 Share Posted August 25, 2010 I thought Nige was running 35-36" Simex with no lift and no spacers and massive articulation. Generally I'd avoid adding height or width unless absolutely necessary, it's usually a workaround for someting else that should be fixed instead... Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted August 25, 2010 Share Posted August 25, 2010 I'm pretty sure that's the 34" Simex JT2s he's on there... Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted August 25, 2010 Share Posted August 25, 2010 I'd be inclined to agree with the above, I think Nige has raised the wheelboxes slightly in the rear to allow more upward travel, but his truck flexes very well and doesn't suffer from the problems of increased COG (and therefore instability) and negative effects to on-ride handling which lifting brings. Also looks awful in my opinion Quote Link to comment Share on other sites More sharing options...
jericho Posted August 25, 2010 Share Posted August 25, 2010 for 35s you'll need 2" lift (min) for 12.5s you'll need minimum of 30mm spacers to maintain decent lock / prevent too much rubbing I run 35/10.5 simex with no lift.The tyres will hit the rear wheel box given a good thump. Extend the bumpstop by an inch,or raise the wheel boxes rather that lift the vehicle. I enjoy the relative stabilty of my truck on side slopes. How can you say he will need 30mm spacers when you dont know what wheels he is using?We are obviously not talking landrover steel wheels if they are 7" wide or over. Quote Link to comment Share on other sites More sharing options...
pete300tdi90 Posted August 25, 2010 Author Share Posted August 25, 2010 I run 3' lift with 5' shocks... have 33' insa's to challenge on and have mach 5s with a large offset and 30 mm spacers to turning is no problem... Just wondering if the 12.5' wide will fit the 7' wide rims mainly. cheers for the help though, and any more info would be nice. Pete Quote Link to comment Share on other sites More sharing options...
bishbosh Posted August 25, 2010 Share Posted August 25, 2010 You don't need 35's to hit the wheel boxes - 235 x 85 will hit if your suspension is any good....... Quote Link to comment Share on other sites More sharing options...
nicks90 Posted August 26, 2010 Share Posted August 26, 2010 You don't need 35's to hit the wheel boxes - 235 x 85 will hit if your suspension is any good....... ermmmm, you sure on that??? i dont think landrover would be allowed to fit as standard a tyre that fouls bodywork (which is an mot fail and would also not pass vehicle manufacture standards wotsit) i had the springs off the back of my truck when i last did the suspension, so i could work out max closed shock length. With the axles resting on the bumpstops there was about 1" between the top of the tyre and the wheelbox. Supposing the bumpstops compressed a bit, it would get mighty close, but not touch. Although different 235/85/16 tyre manufacturers have different 'real world' sizes. I know the simex alike remoulds from Insa can be 33" when new. 255/85/16 or any other 33" tall tyre would touch though. Quote Link to comment Share on other sites More sharing options...
Top90 Posted August 26, 2010 Share Posted August 26, 2010 i dont think landrover would be allowed to fit as standard a tyre that fouls bodywork (which is an mot fail and would also not pass vehicle manufacture standards wotsit) I don't think Land Rover fit suspension packages to allow more flex so this could happen either. Think we are talking 'modified' here. Quote Link to comment Share on other sites More sharing options...
nicks90 Posted August 27, 2010 Share Posted August 27, 2010 I don't think Land Rover fit suspension packages to allow more flex so this could happen either. Think we are talking 'modified' here. very few (none that i know) suspension packages involve removal of, or fitting of slimmer bumpstops to enable more 'up travel'. Therefore if you are using normal sized rubber/poly bumpstops then you will still get the same overall 'compressed state' and hence distance from hub centre to bottom of wheelbox - irespective of the amount of downtravel you get from flappy jonny joints and mega long shocks. Quote Link to comment Share on other sites More sharing options...
bishbosh Posted August 27, 2010 Share Posted August 27, 2010 I am talking about modified suspension - sorry, should have made that clearer, but in my defence we are talking about 35"'s. With +5" shocks I can definately confirm that a 235 x 85 will hit the wheelbox on full articulation. It won't hit on full bump though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.