Stellaghost

Loaded onto my Amazon fire no problem Regards Stephen

The gap for the pulleys is giving me some issues, even my long milling cutters are not long enough.... So my plan is to make an extended fly cutter using the bits below then take thin delicate cuts..... I can do delicate... just for those who might question........lol Regards Stephen

Never going to happen, you would seriously see my lack of skills compared to what you can watch on there... Regards Stephen

A bit of squaring up And just because @Gazzar could watch all day...lol 20230329_111434.mp4 Regards Stephen

An easy bit of electrickery... A small job off the large list Regards Stephen

Agree with that, I still get and always will get a kick out of making stuff Regards Stephen

I will be..........lol Regards Stephen

I've rang them a couple of times, always been helpful, which is why I frequent machine mart Regards Stephen

Coz I've got nowt better to do...... 20230328_191444.mp4 Regards Stephen

A small job but necessary knocked off tonight ( might sate the lack of post's grumpiness lol) Spring retainers fitted Regards Stephen

Still got milling to do to widen gap, using the bandsaw first will cut down on milling time Regards Stephen

A bit more progress First drilled holes where pulleys will sit, drilled and tapped for m12 they will eventually be drilled out to complete size which is 16mm why drill and tap ? I needed a means of holding failead in bandsaw to be able to cut a section out to reduce milling time bracket to hold fairlead Now to start cutting, need to remove a slice 20mm thick, finished thickness will be milled out to 22.5mm Turned around Cuts finished, now drilled in from each side slice removed, saying it is a lot easier than doing it..lol happy with that.. to be continued regards Stephen

Tsk tsk......of course I do... I do 48hrs of of your pace of work in half an hour.......then enjoy the other 231/2 doing other stuff....lol Regards Stephen

That's the way, start him young.... Regards Stephen

I don't see a problem with it providing everything is secure I have done similar many times, it's no different to over hanging ladders etc. The police will only be interested if it's an obvious safety hazard to other road users, tape a white rag on the edge of the door so it will flap around and be more noticeable by other drivers so they can adjust their distance accordingly Regards Stephen

Unfortunately a new puppy takes a wee bit of looking after but rest assured Sid will be ready for June Regards Stephen

How much? Regards Stephen

It's absolutely no good to me, another one of my take it home instead of scrapping it objects Will bring it down to Seven Sisters in june Regards Stephen

It's been like 6 days since last mog post............ you guys are insatiable.... anyway posts will pick up soon my good lady has 6 days away in the next couple of weeks and she is taking our new addition with her so I will be spending 12 hours plus per day getting Sid finished... also plenty of good reading on here to keep you occupied in the meantime....... on a serious note thankyou, I find it rewarding that you guys are keen to see/read about my progress now go and pick on someone else.....lol Regards Stephen

I've got one 13" rim with a tyre on it you can have, so you only need to get another 4 now......lol regards Stephen

Well had a bit play tonight with a piece of 2 feet square half inch aluminium plate with a crack cut into it.... Used some pre-heat and set welder to max, burnt in ok so I think I will have a go at my cracked head, clean it up and then dye pen it, nothing ventured nothing gained Regards Stephen

Hi and welcome to the forum Lots of V8 fans on here, pretty sure you will get the info you need I cut a section off a V8 crank years ago to fit one of the above kits, took it off with a hacksaw does not need to be perfectly square it just needs to allow the spigot bush to be fitted, so providing the spigot bush can be bolted up square it won't matter if the end of the crank is slightly wonky Good luck with the project will be watching with interest Regards Stephen

I have a spare head that is cracked between valves, have wondered about having a shot at welding it up, more so since I got my spool gun setup, nothing to lose I suppose Regards Stephen

I'm liking that Also makeable me thinks, a future project with a spare vice I have... regards Stephen

You could possibly flip the axle, but you would also need to alter all suspension mounting points, bump stops etc, you could also change diff pumpkin position which is what I did when fitting Unimog 404 axles to my lightweight ( mog 404 axles thread )either way your looking at a decent amount of work Regards Stephen