Stellaghost

Wrong thread..

It would it the wiring look was off the car........... Couldn't get a matchbox toy in the garage at the moment....also Sid has grown in stature and is no longer able to get in the garage.. Regards Stephen

Oh dear No wiring today then nearly 4" of snow overnight You cannot imagine how upset about this I am............ Regards Stephen

Me neither, never had issues with lack of pressure regards Stephen

I CAN DO LIGHT..............I think..... Regards Stephen

Ok no problem Regards Stephen

@miketomcat if you can knock up a sketch of what you need I should have enough steel kicking around to fab something up for you......Could bring it down at Summer sisters if that's not too late Regards Stephen

Think I must too... Will have 44 years service in August, same company in its many guises... Regards Stephen

Another dull day at the office... 19E1F4E2-~3.mp4 .....lol Regards Stephen

If that's a shed,I've been working in a telephone box all my life........lol Great work keep posting please Regards Stephen

Maybe not quite.... As it sits at the moment I have 16" clearance under the lowest point in diff, 22" under lowest point of chassis and 24" under main chassis rails a wee bit of improvement over a standard lightweight....... Regards Stephen

If you cannot get any you could make some by buying some 7/16 threaded bar available in 36" lengths and welding a 7/16 unc nut onto one end regards Stephen

Funny that, Red 90 sprung to mind for me...... regards Stephen

Thanks They are the last of what my mum made for the dogs before she passed, her way of using up remnants of wool Regards Stephen

Glazed Regards Stephen

Yes Please......... Regards Stephen

Not familiar with the door, does it have the button that pops up when door is unlocked, if so you could try and hook something into it and pull it up to release catch, drill a small hole in the top and put a self tapper in so you have something to pull off Regards Stephen

That would be a dog bed disguised as a welding bench........lol Regards Stephen

So in-between the little fellas playing and naps I managed to get door top fitted Couple of recycled door top bolts modified Fitted Tried for fit Sorted and fitted "Just like that"............lol Regards Stephen

You may have noticed I've slowed down a wee bit, change of priority at the moment due to this little guy joining the family regards Stephen

Unfortunately any diff locking device will not guarantee not getting stuck in those conditions... Regards Stephen

Are your welders grinding the crack out into a v shape so you get full depth penetration also you could think about adding some heavy box section similar to what the military do to their axles to increase the strength of the axle case I would also consider a winch for self recovery, should get you out of more situations than a locker, a decent winch and ground anchor system with a couple of rope extensions would have probably freed you of the rivers clutches Regards Stephen

Very much so, really increases fabrication speed with aluminium tremendously To be continued......... Regards Stephen

Lol very good...... regards Stephen

Got my gas and finished welding window top Blended Primed Painted Regards Stephen