Your PC can't be tired, more like completly shattered with 12003 post to your credit, just seen this on your profile Total Posts: 12003
( 823.25% of total forum posts )
Posts per day: 2222.4 ----------------------- did you do any work today, I think Not
somfink not right here, reckon there's some really dodgy dealing goin' on
No, don't know anymore than the rest of you, Mods/Admin excepted, just that the story is bound to be told sooner or later when things have cooled down.
Our Esteemed Les.H. posted this on earlier
When the Lre forums finally disappear then I'll give you the information you require, but we still have to tread carefully for a couple of months. You'll all be able to vent your anger on here eventually - promise.
Before then it might cause more trouble for us and ruin some plans.
so that's why I added that reply
What's the diameter of the pipe on the filler and tank ?
110's have a stepped rubber hose to join the 2, part number is NTC2357 or RRC4418 for a 130 if their of any use.
as for photo hosting I use this one http://www.photobucket.com/register.php it's Free B)
EPC shows anti-squeal shims in each rear brake pad axle set, it doesn't list them seperatly, if they aren't fitted maybe the previous owner left them out. most likely LR would have fitted them when the vehicle was new.
just been out and measured my glass panel it's 151/4 inches or 387mm front to rear and 291/4 inches or 744mm side to side, hope that helps give you some idea of the seal size