Hybrid_From_Hell Posted January 21, 2017 Share Posted January 21, 2017 Prototyping time !!. We never really see / saw many P38 / Wolf/ 110 TD5 0nwards differentials. The 2 pins are chap as always... where as the 4 pins are very strong ....but suffer from crown wheel failure . Even HD Ashcroft P38 SN CWPs can shear ...and add an ARB and they break even quicker. In the challenge world and in Cummins conversions and tow wagons upgrades from.salisburys etc they have been slowly growinh on populaeiry and we gwy more and more in for work and upgrafes etc We have been asked many times about pegging theae ahoet noae inoys lkke we so kn rhe long nose casing... So Some measuring CNC bits and bobs and a casing and much oooing aaaaring and hmmmming we have a prototype . Casing going off the be aqua blasted then welded and built up . Prototype 4 pin pegged Short Nose with prototype P38 Superflange and forged centre tube hope to have done and at Donington 4x4 show for cuddling by interested parties (diff not us ?) 1st pics. 2 x plates = 24mm metal S275 and M16 x 2.00mm threads with phosphor bronze pad and special bolts. RD138s ARBs can be fitted we think with minor machining mods we can do on house ...so need some belp Need to know about the 2 x mounting hols shown on pics. Is anything in them/ used in the rear ....even a guard etc. If so would the plates when TIGged in clear ? Fronts I think have a harmonic dampener bolted on the 2 x holes.again ...If it was to be left on there would my plates clear it???? Pics would be much appreciated Oink Quote Link to comment Share on other sites More sharing options...
dailysleaze Posted January 21, 2017 Share Posted January 21, 2017 I had a QT guard that fitted into those two holes: Quote Link to comment Share on other sites More sharing options...
zim Posted January 21, 2017 Share Posted January 21, 2017 Do you need any other info Nige? I have a pair of removed 4.6 p38 axles floating around the yard. G Quote Link to comment Share on other sites More sharing options...
SteveG Posted January 21, 2017 Share Posted January 21, 2017 IIRC Nige that's where the harmonic damper was bolted to. cheers Steve Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted January 21, 2017 Author Share Posted January 21, 2017 Just damper on front ? Would it still fit ..or fit bit a little bit of grinding??. Quote Link to comment Share on other sites More sharing options...
zim Posted January 22, 2017 Share Posted January 22, 2017 Would you like the bracket sent to you ? Quote Link to comment Share on other sites More sharing options...
SteveG Posted January 22, 2017 Share Posted January 22, 2017 17 hours ago, Hybrid_From_Hell said: Just damper on front ? Would it still fit ..or fit bit a little bit of grinding??. Both front and rear. Bracket is just a rectangular piece of metal, so going by your pic above it looks like you could just goring the bracket down to fit. cheers, Steve Quote Link to comment Share on other sites More sharing options...
Troll Hunter Posted January 23, 2017 Share Posted January 23, 2017 Hey, Guys, I can't contribute on the technical side, partly because I can't understand a lot of it: " We have been asked many times about pegging theae ahoet noae inoys lkke we so kn rhe long nose casing... " Please, use a word processor, or at least read what you have typed before you upload it. Something about "Rubbish in ........." comes to mind. Mike Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 23, 2017 Share Posted January 23, 2017 Or just use Chrome, which spell checks for you! Quote Link to comment Share on other sites More sharing options...
landroversforever Posted January 23, 2017 Share Posted January 23, 2017 Nigel's fingers strike again.... he's the same on his phone and computer Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 23, 2017 Share Posted January 23, 2017 Some say he is even like it in real life.... Quote Link to comment Share on other sites More sharing options...
Daan Posted January 23, 2017 Share Posted January 23, 2017 Ebay rules: Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted January 23, 2017 Author Share Posted January 23, 2017 On Sun Jan 22 2017 at 2:03 PM, zim said: Would you like the bracket sent to you ? Oooo please Mr ?????? Quote Link to comment Share on other sites More sharing options...
zim Posted January 25, 2017 Share Posted January 25, 2017 On 1/23/2017 at 10:49 PM, Hybrid_From_Hell said: Oooo please Mr ?????? I won't be down to the workshop till Friday, but will sort something. G Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted January 25, 2017 Author Share Posted January 25, 2017 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.