skauldy Posted October 28, 2015 Author Share Posted October 28, 2015 Can you fit the defender 4 pots onto them Quote Link to comment Share on other sites More sharing options...
jbs Posted October 29, 2015 Share Posted October 29, 2015 Ross, Could I ask how much were your brake lines for the rear please? John Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 29, 2015 Share Posted October 29, 2015 I can't remember off the top of my head! I'll have a look when I get home. Feel free to remind me if you don't hear for a couple of days Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted October 29, 2015 Share Posted October 29, 2015 Llama make them up to order, £15.50 +VAT, perhaps the banjo fitting might be a touch more, but I don't think there was a premium for mine. http://www.llama4x4.com/page10.htm 1 Quote Link to comment Share on other sites More sharing options...
Chicken Drumstick Posted October 29, 2015 Share Posted October 29, 2015 I get mine from David at Llama. Always had good service from him. 1 Quote Link to comment Share on other sites More sharing options...
landroversforever Posted November 2, 2015 Share Posted November 2, 2015 Ross, Could I ask how much were your brake lines for the rear please? John £44.85 for the rear axle set (Doesn't include the axle-chassis one) and includes postage. 1 Quote Link to comment Share on other sites More sharing options...
jbs Posted November 3, 2015 Share Posted November 3, 2015 Thanks Ross Quote Link to comment Share on other sites More sharing options...
skauldy Posted November 3, 2015 Author Share Posted November 3, 2015 Just looking at me disco 2 and notice the front callipers have 2 brake pipes going into them. Obviously dual circuit. How do I get around this fitting them to the defender with a single circuit master cylinder. Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted November 3, 2015 Share Posted November 3, 2015 T-piece. Quote Link to comment Share on other sites More sharing options...
ejparrott Posted November 3, 2015 Share Posted November 3, 2015 It's just a twin feed. Defender callipers are the same but are fed by only one pipe. Just tee off the supply. Quote Link to comment Share on other sites More sharing options...
RedLineMike Posted November 4, 2015 Share Posted November 4, 2015 Discovery 2 front calipers only have 1 pipe feeding them? 1 Quote Link to comment Share on other sites More sharing options...
skauldy Posted November 4, 2015 Author Share Posted November 4, 2015 Discovery 2 front calipers only have 1 pipe feeding them?Hmm wait was I looking at them lol. I just stuck my head in the wheel well. Could have sworn it was two. No worries. If it is two ill just do a t piece as above. Pity you can't fit the four pots off a 110 Quote Link to comment Share on other sites More sharing options...
RedLineMike Posted November 4, 2015 Share Posted November 4, 2015 probably the abs cable. Quote Link to comment Share on other sites More sharing options...
skauldy Posted June 8, 2016 Author Share Posted June 8, 2016 Finally got round to doing this. Big thanks to Paul from tomcat Motorsport for his patience and emails . All that left is to weld in the brackets for the watts linkage, remove axles again and good clean with a lick of paint. Quote Link to comment Share on other sites More sharing options...
NRS91 Posted March 1, 2017 Share Posted March 1, 2017 skauldy, how did the Watts linkage mounts go? Quote Link to comment Share on other sites More sharing options...
skauldy Posted March 1, 2017 Author Share Posted March 1, 2017 Handy enough. You will have to remove the defender bump stop bracket as the watts linkage chassis mount lands right in the middle of it and fit a disco 2 bump stop bracket Quote Link to comment Share on other sites More sharing options...
NRS91 Posted March 1, 2017 Share Posted March 1, 2017 fair enough, any pics of the finished product? Quote Link to comment Share on other sites More sharing options...
skauldy Posted March 2, 2017 Author Share Posted March 2, 2017 Yep can get some pics Saturday of the watts linkage finished. I was lucky enough to have a disco 2 as my daily so could pop out and check things. Just thinking I'm still not finished the build and the truck is pretty light so the watts linkage will look strange, on my disco they run parrellel to the axle and look like a stretched Z. Can take a pic of that too if it helps shane Quote Link to comment Share on other sites More sharing options...
NRS91 Posted March 3, 2017 Share Posted March 3, 2017 Thanks Shane, I also have a Disco2 daily driver and a Defender build that I am still contemplating suspension ideas on so any pics you can get will be great. Quote Link to comment Share on other sites More sharing options...
skauldy Posted March 3, 2017 Author Share Posted March 3, 2017 No worries will get some. To be honest though if my defender was just for off road I wouldn't have done it the way I went. I would have fabb'd the brackets up myself and would ditch the watts linkage for a four link. Quote Link to comment Share on other sites More sharing options...
NRS91 Posted February 21, 2019 Share Posted February 21, 2019 any joy on those pics? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.