Mo Murphy

Thanks Ross.

A picture paints a thousand words Ross Mo

Here HTH Mo

One of lifes genuinely nice people

I'll go and have a measure up Les. 65" wide x 36" high x 40" (steering wheel to end of brake master cylinder) I think you'll need the disco Mo

Nicely done, sharpy Mo

Yup, G, on plinths. Mo

White90 on here had great sucess with a drain cleaning attachment on his pressure washer Mo

Only buy the original Perei branded NAS lights, they are more expensive but are far superior. The cheap ones are made by Wipac to their usual low standard. Poor water sealing and electrical connections that dismantle themselves as you push the plug onto the back of the light being my main gripes. I had the Perei version on my last 90 for 7 years without a single problem of any kind which is more than can be said for the current Wipac set on current 90. You get what you pay for, I'm afraid. HTH Mo

Nice one harle

I'll get me coat ...

Just to complicate things I used the green one to get a spot on reading with 255s Mo

Never heard of it, sorry !

It's in the 200 position, Bish

Thanks for that, I have a couple of sets of adapters here so I "should" be able to deal with that problem.

Thanks Andy, I've done that before but the cost was as high as new oil pipes, so, if defender ones will fit, I'd rather have the reassurance of having fitted new parts that require no modification. Mo

Evening all, A couple of questions for those of you that have done this conversion. What bottom hose did you use ? The coolant inlet on the engine is a good bit lower than the rad so the hose is close to kinking. Secondly, regarding the oil cooler lines, do standard Defender items do the trick, are they long enough ? TIA Mo

Only do the above if you have a headlining othewise you will find bits of scalp skin hanging from the end of the bolt/nut. I speak from personal experience Mo

Or you can pop down to your local Halfrauds, they sell assortments of them Mo

A grommet ?

You could always stick the auto box in too Mo

I think Dan was referring to a musical disco Jason, so your red and blue additions will fit right in You've done a nice tidy job there, very neat and they certainly look effective

Adwest ?

There is no problem with normal pop rivets being used on the cappings. Mo

My microcat goes up to 2006 I need the part number for the filler cap. It looks somewhat bigger than the previous under wing washer bottles. TIA Mo