Hectichaggis Posted October 18, 2014 Share Posted October 18, 2014 Hi everyone, I'm getting a NAS Towstep for 110 and will fit towball etc. There seems to be a real variety in terms of prices for the electrics (LR specific is more than £70 or generic one for £12). Can you tell me if I need a specifically LR Defender electric pack or will any tow electric pack do? I'm guessing I only need the N style as I don't have a caravan? Thanks for any help! Cheers Quote Link to comment Share on other sites More sharing options...
Happyoldgit Posted October 18, 2014 Share Posted October 18, 2014 Age of vehicle would help Quote Link to comment Share on other sites More sharing options...
PaulMc Posted October 18, 2014 Share Posted October 18, 2014 If I read the OP's post correctly, in this thread - http://forums.lr4x4.com/index.php?showtopic=68392 He's awaiting delivery of a new Defender. Hi guys,Complete newbie here and expecting my first LR in couple of weeks. In which case, the Genuine Land Rover kit is the one I would recommend. The Genuine kit plugs-in to a socket under the O/S rear wheelarch. The wires into the back of the 12N socket are sealed. It also has sealed connectors on its harness for plugging-in some of the 12S circuits. The generic 12N kits don't usually have the wires sealed into the 12N socket and, at the other end, are just bare wires. . Quote Link to comment Share on other sites More sharing options...
Hectichaggis Posted October 19, 2014 Author Share Posted October 19, 2014 Thanks Paul, yes it's a new vehicle. So - the LR005920? Is worth the extra cash? Found it online at island4x4 for a tad under £40... Just seems a lot... Cheers Doug Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted October 20, 2014 Share Posted October 20, 2014 Doug, if it's a new vehicle use the genuine stuff. You will pay more for it but it is better than the other stuff out there. If you let the gremlins in you'll have a devil of a job getting them out again. Mo Quote Link to comment Share on other sites More sharing options...
PaulMc Posted October 20, 2014 Share Posted October 20, 2014 Thanks Paul, yes it's a new vehicle. So - the LR005920? Is worth the extra cash? Found it online at island4x4 for a tad under £40... Just seems a lot... Cheers Doug Yes, that's the one However, the one you've seen at Island 4x4, is an 'OEM' kit made by Britpart As you'll learn, anything in a 'Blue Box' labelled Britpart, is usually to be avoided. They use the term 'OEM' (Original Equipment Manufacturer) a bit too liberally - as, their kit bears little resemblance to the Genuine Parts kit. If it is made by the OEM (which I very much doubt) - then, it's been 'made to a price' - as, it's been made from much cheaper, inferior components. Britpart kit - As you can see in the above picture - The 12N socket is separate from the harness and has to be assembled to it, with a separate gasket. The harness is covered in PVC sleeving. The 'tap-off' for reversing lights and permanent live (for the 12S socket) is an unsealed 2-way AMP 'fastin' connector. The Genuine Parts kit (these are my pictures of one I sold on eBay, a while back) - As you can see from the above pictures - The 12N socket is assembled to the wires and sealed against water ingress. The harness is covered in convoluted tubing, offering more protection than PVC sleeving. The 'tap-off' for reversing lights and permanent live (for the 12S socket) is a Delphi MetriPack sealed 2-way connector. There's also an additional 'tap-off' on the rear fog lamp circuit, using a 2-way sealed Econoseal connector with a loop-back, which would allow you to break the fog lamp circuit to the trailer - I'm not sure what that's actually for, and there's no reference to using it, in the instructions The only thing that the two kits have in common, is the Sumitomo Grey DL sealed 9-way connector, to pick-up the mating connector on the vehicle. One thing I would recommend, regardless of which kit you opt for, is that once you've plugged the Grey connectors together, use spray Waxoyl to liberally coat over both connectors and their wires, to keep the water out of them. Although the Sumitomo connectors are environmentally sealed, they're in one of the most inhospitable places on the vehicle - under the wheelarch, right behind the wheel, and they are subjected to mud and spray from the tyre. The connector would have been better placed, inside the vehicle, behind the rear light cover - but, this would necessitate a large grommet in the wheelbox, or the connector(s) left unassembled until the wiring had been passed through the grommet in the wheelbox. Anyway, as Mo has said, on a new (expensive) vehicle, why spoil it by fitting inferior accessories. . Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted October 20, 2014 Share Posted October 20, 2014 Generic ones usually use the dreaded scotchloks which is a great way of ensuring electrical problems down the line, gen ones plug into the proper plug. Genuine ones can be found reasonably on eBay etc. from dealers if you keep an eye out. Quote Link to comment Share on other sites More sharing options...
Adam001 Posted October 20, 2014 Share Posted October 20, 2014 If you are getting a new Landrover why not ask the dealership to fit it for you, and ask for a deal on it? That way you can keep your warranty intact! Quote Link to comment Share on other sites More sharing options...
Scotts90 Posted October 20, 2014 Share Posted October 20, 2014 Apologies for the thread hijack, but is the vehicle side of the sumitomo 9 way connector (female) available anywhere? The one on my td5 loom is goosed and I have a genuine set of electrics to plug in. Failing that it'll be hacked off and suitable weatherproof connectors used. Quote Link to comment Share on other sites More sharing options...
Happyoldgit Posted October 20, 2014 Share Posted October 20, 2014 If it's a late model then buy the pukka one, you know what you are getting, it's plug and play and the vehicle deserves something that will be up to the task. Quote Link to comment Share on other sites More sharing options...
Hectichaggis Posted October 20, 2014 Author Share Posted October 20, 2014 Thanks for the thorough advice Paul and everyone. On a related point, when buying the towball - is there anything I need to look out for or will any one do? Thanks again Doug Quote Link to comment Share on other sites More sharing options...
Adam001 Posted October 21, 2014 Share Posted October 21, 2014 Just make sure the kit is certified (Look for CE marks etc). it should have suitable spreader plates and braces back to the chassis as a minimum. I do hope though you have checked your warranty details. Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 21, 2014 Share Posted October 21, 2014 There's also an additional 'tap-off' on the rear fog lamp circuit, using a 2-way sealed Econoseal connector with a loop-back, which would allow you to break the fog lamp circuit to the trailer - I'm not sure what that's actually for, and there's no reference to using it, in the instructions . My Isuzu has the 13 pin socket which disables the vehicles rear fog light when a trailer is connected. Could it be for that? I found that 'feature' out as it nearly failed it's first MOT when I left the 13 - 7 pin adaptor in Quote Link to comment Share on other sites More sharing options...
PaulMc Posted October 21, 2014 Share Posted October 21, 2014 Apologies for the thread hijack, but is the vehicle side of the sumitomo 9 way connector (female) available anywhere? The one on my td5 loom is goosed and I have a genuine set of electrics to plug in. Failing that it'll be hacked off and suitable weatherproof connectors used. I've not managed to find a source for the Grey 9-way connector. Although, it's not a single part number, there are several component parts, all with their own part numbers and MoQs (Minimum order Quantities) - Grey hybrid 9-way female connector housing with retainer 090 (2.3mm) female terminals and wire seals 187 (4.8mm) female terminals and wire seals I have some of the terminals and wire seals to fit this connector, but not the housing. There is a Black version of the female 9-way housing, which I am able to source - but, Sumitomo describe it as "special shape" and don't specifically state that the Black female housing wlll mate with the Grey male housing. From Sumitomo's images of the two versions, they look identical - Grey Black But, without comparing the two, I wouldn't like to say whether or not that is the case. The next time I place an order, I will add a couple of Black connector housings, to see if they will substitute for the Grey housing. My Isuzu has the 13 pin socket which disables the vehicles rear fog light when a trailer is connected. Could it be for that? I found that 'feature' out as it nearly failed it's first MOT when I left the 13 - 7 pin adaptor in At first, I thought it might be for that - but, it breaks the trailer's fog lamp connection, not the towing vehicle's . Quote Link to comment Share on other sites More sharing options...
Scotts90 Posted October 21, 2014 Share Posted October 21, 2014 Thanks anyway Paul. I did find the sumitomo catalogue and looked at the identical looking "special shape" . I'll just whip the plugs off and fit econo/superseal connectors. Quote Link to comment Share on other sites More sharing options...
Northwards Posted May 22, 2023 Share Posted May 22, 2023 On 10/20/2014 at 9:32 AM, PaulMc said: http://img.photobucket.com/albums/v686/paulmc0308/eBay-Me/Land_Rover_Parts/DSC01468.jpg As you can see from the above pictures - The 12N socket is assembled to the wires and sealed against water ingress. Hi folks, I know this is a pretty old thread, but I've been buying towing wiring stuff - connectors etc, and found this thread. Specifically interested in the sealed/potted socket shown above. Since seeing it I've googled for 'sealed towing sockets' but found nothing like this. I think i read elsewhere that Paul Mc used to sell stuff, but has closed down an eBay shop(?). Any ideas where I might find such a thing? I suppose I could make up a socket and then put some fibreglass resin into it - but I don't know if that's conductive or not... Or as it's for a friend's car, if it becomes another hassle I might not bother - but just interested as I'd never seen the like before. Thanks. Quote Link to comment Share on other sites More sharing options...
Phill B Posted May 22, 2023 Share Posted May 22, 2023 Like you say, do it yourself. You can buy the potting compound at any electronics outlet, Amazon, eBay, etc. https://www.ebay.co.uk/itm/125734829206?hash=item1d46613c96:g:NKsAAOSwOIFjz3QA&amdata=enc%3AAQAIAAAA8Nx0ATEX8X4dMCLuuhUNZmRBU%2FemLO3UKo8eyN8ywh5EW7XJThJzYYpLEqR5jqHgplqu1m6hF6BnLYiqMhFTIG8zrz%2Fy7rfP%2FV9TlBHKlkC5I2UOsyVQf1n%2B%2FwAR3QxmT0xk7Qw%2FlM0UaZcVxFmvLxg22lp0SWTQodQenKY4czYPJuYtlTsquB4gKNDHXwIw2NDlz%2BR1ubJe8Pkolk%2B3mNkvyOIsEInHE7t%2B%2F8nNwkWMR1TESkqUclJ6nwzK9xWVg2t5nK5havSjgDc%2FlanpMwz7cWrpM2TaLG%2B0Jky4UGWsC5ub0tWtKIFE2l0rb1bn4Q%3D%3D|tkp%3ABk9SR_zNpbCIYg Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted May 22, 2023 Share Posted May 22, 2023 Link minus all the tracking BS: https://www.ebay.co.uk/itm/125734829206 Quote Link to comment Share on other sites More sharing options...
PaulMc Posted May 22, 2023 Share Posted May 22, 2023 2 hours ago, Northwards said: Hi folks, I know this is a pretty old thread, but I've been buying towing wiring stuff - connectors etc, and found this thread. Specifically interested in the sealed/potted socket shown above. Since seeing it I've googled for 'sealed towing sockets' but found nothing like this. I think i read elsewhere that Paul Mc used to sell stuff, but has closed down an eBay shop(?). Any ideas where I might find such a thing? I suppose I could make up a socket and then put some fibreglass resin into it - but I don't know if that's conductive or not... Or as it's for a friend's car, if it becomes another hassle I might not bother - but just interested as I'd never seen the like before. Thanks. My eBay shop for connectors is still up and going strong - https://www.ebay.co.uk/str/landroverconnectors But, the Genuine 12N Towing Kit that I sold back in 2014, was a 'one-off' that I sold on my personal account. I'd picked it up cheap at one of the summer shows, intending to fit it to my 110 - but, at the time, I couldn't get the 9-way Sumitomo connector for the vehicle loom, so decided to sell it. The Genuine Land Rover 12N Kit LR005920 is worth the extra few pounds (see my comparison pictures in my earlier post) - https://rimmerbros.com/Item--i-LR005920 Be careful where you buy it from, as the 'OEM' kit uses the same part number, and some suppliers seem to think that 'OEM' is 'Genuine' 😒 . 1 Quote Link to comment Share on other sites More sharing options...
Northwards Posted May 22, 2023 Share Posted May 22, 2023 Thanks all, Phill B (and FF) thanks for the link. I’d heard of things being ‘potted’ but had never heard of potting compound and might not have thought to use those search terms. 👍 Paul - sorry for suggesting that your site wasn’t working. Clearly wrong on that one, and I’ve marked it for the future. I think it might need to be DIY though as although that genuine one looks grand, the car I’m researching this for is far from pristine. It has the trailer and charging sockets, and both 7 way cables are joined to the loom in a “buggers muddle”. From memory the best case scenario is a bunch of bullet connectors, although at least I don’t think I saw any scotchloks. I’ve got a couple of 8 way econoseal sets on the way so that I can tidy up both cables and stash them behind the to-be-fitted GLewis mudshields. The idea of potting the sockets comes from the fact that the last mile and a half to my friend’s house is down a forest road and unmade track. Using that at least twice a day exposes the back end wiring to a lot of abuse. Thanks again. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted May 23, 2023 Share Posted May 23, 2023 RS sell potting-compound glue sticks for glue guns, it's a bit of a fiddle but does allow for better control, regular potting compound would run out through all the pins in a trailer connector and create a hell of a mess. Guess how I know that Quote Link to comment Share on other sites More sharing options...
Northwards Posted May 23, 2023 Share Posted May 23, 2023 Excellent, thanks. I had wondered if that might happen - now I know without having to make a mess in the process! I've never had a glue gun, but I know they're not expensive. Sorted! Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted May 23, 2023 Share Posted May 23, 2023 You can melt those sticks with a hot air gun and drip it into the back if you're careful (like dripping candle wax), but a glue gun makes it much easier. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.