barmiebrumie

Not sure about part numbers but think one of a Rover 75 or even a BMW ill fit as they both use the same engine John

Having had both in petrol & diesle versions (still got a Focus Ghia petrol) think the TD4 Freelander is a much better choice , swmbo is itching for another Freelander so might be going down the same road as you pretty soon John

Have a look on some 'custom car/hot rod' forums as a lot of them have them fitted & if they are wider you could just take a section out of the middle John

I know what you should do SELL IT TO ME , & we'll say no more about it No really if it was me I'd use it, keep photos of the re-build & any reciets as its like for like, but if you change your mind John

I think you may struggle there but you never know , & if you do get a complete hood/stick set for that sort of money I'll be very jelous John

depends what sort of buget you have, got mine complete off ebay, came with a 'wolf' hood but have since changed it for a new unused canvas again off ebay but then had to change the front hood/screen bar/lockrail in all owes be about £500.00 John

Had 5 Discos, 2 Rangies & now a 90, all of them have had retainers on front/rear if a shock was to break at the bottom your spring would 'fall' out John

Some of those must of migrated up this way !!! (I'll get my coat) John

wont affect your insurance, but you will have to change the details for colour on you V5 (log book) & send it to DVLA. I have some anti-radar nato green if you need any John

had that once on a Disco & it was the bracket on the axle for the panard rod had started to break away , & yes that wobble was really scarey, shook my truck to bits. John

When I build my next project (soon please)I will be fitting a EVO 8 intercooler into it as its full width & very deep :-), have heard of a few fitting TD5's to 200 & 300 discos, I do have a spare one of them as well Thanks John

Just to let you all know & say thanks for the info posted & pm'd, new rail (from All Wheel Trim) now fitted & working, hopefully will be able to get the rest done over the winter , subject to Wifey finding any more building projects . Thanks again John

If you could get it to Brum I could help you out ? Thanks John

I never new that, not trying to get it ant cooler just thinking of options & not having to many rads in there thanks John

Yes they do, thats why I using the Ford auto oil cooler but the one I am concerned about is the engine oil, or maybe I could use the 'bog brush' one that belonged to the Range Rover ??? Thanks John

Hi all Very soon I will be starting my winter project I will be doing a 200tdi rangy engine & autobox into my 90, I have done lots of research (mostly on here ) but cant find anything about using the original radiator. My idea is to use the original radiator as it is full width, I have a very large intercooler (EVO 8)& a large (ford) cooler for the autobox, but not sure about the engine oil pipes that normally go into the 200 radiator , question is could I just use another large oil cooler & get the pipes made up ? Oh & will be fitting lecky fan so think I should be ok for space Thanks in advance John

chavtastic innit guy, no wat i's mean ? why why why would you ?, if you like them please log off & unsicribe to this forum John

Had the same problem on mine a couple of years ago, I had to get them off to fit a tank gaurd as that was also bolted there, in the end fount it quicker to cut them off with the grinder & fabricte new ones with steel pipe & some 5mm steel at each side welded to the chassis Hope that helps & good luck.

on a serious note try soaking a rag in deisle & leaving it over the bolts overnight, might help me though I prefer the GAS AXE

yep stilsons do it & wear some gloves its puffy & will save your skin good luck with them john

Ditto, had the same one a 200 I had & I used to start that in gear quite often John

All the VIC is for is to make sure its the vehcilce its supossed to be & not a 'ringer', cant see you having any problems been to loads of them now & never had any issues John BTW good luck to your wife

Will be fitting one like that to my 90, so have printed off the instructions, so much infomation on here but so little time to use it John

Can anyone tell me what the name of the treatment is for a canvas roof to help keep it waterproof Thanks In advance John

yes just bypass it with a bit of pipe, done this on a 200tdi & had no problems at all, if you have access to an air line you could take the fuel line of & blow back any debris toward the tank as well John