Mo Murphy

Go here Uncle

I forgive you Ralph Mo

Firestone SATS and a V8 in my 2A, happy memories Mo

Ralph, then hang head in shame but thanks anyway Black Cab, I'll try that then, cheers. Mo

Back in your box, Stephen

Anyone

Thanks Jim, just what I needed. Chris, I don't know if that's what I needed ???????? Cheers Mo

Hmmm.... Hear hear, I think Kev's talking in the right direction. Mo

You don't need a trailer now Chris, you've bought a barge ! Mo

My hi-lift is secured to the roll cage back stay with U clamps with a M10 bolt welded to each and wing nuts to secure the jack to the bolt. Quick and secure. I have lots of QFs in my landy but I don't think I'd like to rely on one to hold the jack in place which is why I didn't use them for that purpose. HTH Mo

I can't adjust 2" of free play out of the clutch pedal. I've just fitted a 300 Tdi clutch pedal assy to my 90 and I can't adjust the play out. I'm getting no air through in the last 2 bleeds, I've set the pedal height to 140mm and I've set the push rod play to 1.5mm. I did have a bit of extra play with the old pedal which I put down to worn pivot bushes (they were very worn), so I suspect the problem may lie elsewhere, the slave perhaps ? Your thoughts and assistance would be welcome. Mo

Morning Chaps, Two quick questions for you - The current warning lamp module is the original '86 version with a single shared indicator warning lamp and the trailer warning lamp which also acts a the hazard warning lamp. Where in the system can I pick up separate L and R feeds for a later warning lamp module with R and L indicator warning lamps. Since I don't use a trailer, I shall plug the trailer/hazard straight onto the hazard lamp in the new. Anyone foresee a problem with this ? Cheers Mo

I've never had nylocs come loose either ! It's probably, as the others say, a quality issue. Mo

Surely there's a minimum age for dogs preparing and serving food. They should at least wait until they're adult. Mo

The Indians also built the Lambretta Grand Prix models after the Italian factory switched production to the Mini. They were truly awful quality. I know, as I had the misfortune to buy one new. Many county brand pattern replacement parts were made in India and we all know what complete **** they were. Mo

Check that the fuses and the fuse holders are all clean (read shiny). The older ones like ours with glass fuses are susceptible to a bit of oxidation. A good clean up will often solve many mystery electrical problems. HTH Mo

Yes, I admit it It's so big that I had to buy a little land rover to make me feel more normal. Mo

Dew [Mo scratches head], how on earth did you almost get stuck ? Mo

Shoo, away with you 110 barge owners, this is a 90 thread. There's nothing for you here, go on, be gone. Mo

MOG, will you be kitting it out as an ambulance/camper then ? Mo

Where's the cargo hatch ? Mo

I'm confirming for that November date. Don't you have to help wash up and stuff in youth hostels ? It might be wise to take some women if that's the case Mo

I saw lots of evidence of this, this week whilst laning in Surrey and Hants. It's large scale and heavy damage. Effin' diabolical Had I seen anyone playing I would have been more than happy to have filmed and reported them. Mo

I have a nice shiny stainless tank, no rust for me Mo