Jump to content

OT: We Take Yard Maintenance Very Seriously


Lewis

Recommended Posts

Outside the workshop is a lot of unusable space so with the imminent arrival of some more junk it was high time we cleared up a bit

The main offender is a 40ft flatbed artic trailer loaded with a skip and an ex MOD forklift, no problem for the digger we thought

Not so, turns out skip is loaded with around 12tonne of bolts, great :angry:

So we pushed the forklift off the back of the trailer, and attempted to move the skip further down the trailer so it was above the axle, thus reducing the noseweight on the flatbed and making it much easier to move around

The digger hadnt quite enough reach to shift it so it was out with the winches

SD531186.jpg

SD531188.jpg

But all that did was drag the 90 closer, so a ground anchor was required in the form of another forklift

SD531191.jpg

SD531192.jpg

With the extra bit of pulling power from the 8274 we were able to move the skip and then lift the nose of the flatbed and shift it with the digger

SD531193.jpg

SD531195.jpg

Now we will be able to get the 360o down the far side of the workshop and clear some scrap out :)

Lewis

Link to comment
Share on other sites

I do love dogging scrap out :rolleyes:

looks like a lot of fun and nice to see an old machine workin, it always amuses me that old jcbs are 'RHD' as opposed to all other 360's that are 'LHD'.

Link to comment
Share on other sites

I do love dogging

Now theres an admission :moglite::ph34r::lol:

Now I appreciate that "have winch, will play" philosophy but I can't

help thinking a Volvo FH12 would have moved things a little easier :D

Sadly we dont have an FH12 lying around, there are 3 2004 Fodens and 3 2006 Dafs further up the yard though. And today the trailer is being moved with a 3185 Fastrac with the fueling sorted to 250hp :o

Whats that thing in the background with just the seat?

Looks militaryish!

from the chassis with holes I'm guessing a Unimog

Thats the forklift, its called an Eager Beaver, they were built for the Falklands war to be airlifted, they are quite an odd design - very long with the engine all the way back to remove the need for a counterbalance weight, its powered by a Perkins 4236 (?) and has four wheel hydro steering and 42" XZL's :)

And i thought you worked for a certain vehicle R&D place.....looks a bit er, scrappy for them!

Yeah I do, this is my rented workshop for looking after the cars. And its in an old scrapyard ;)

Lewis :)

Link to comment
Share on other sites

Thats the forklift, its called an Eager Beaver, they were built for the Falklands war to be airlifted, they are quite an odd design - very long with the engine all the way back to remove the need for a counterbalance weight, its powered by a Perkins 4236 (?) and has four wheel hydro steering and 42" XZL's :)

Yep, still a few soldiering on down here, pretty tough little things too :)

Link to comment
Share on other sites

Thats the forklift, its called an Eager Beaver, they were built for the Falklands war to be airlifted...

A little older than that in fact. The Royal Engineers first had them in '69. ;)

Link to comment
Share on other sites

Thats the forklift, its called an Eager Beaver, they were built for the Falklands war to be airlifted, they are quite an odd design - very long with the engine all the way back to remove the need for a counterbalance weight, its powered by a Perkins 4236 (?) and has four wheel hydro steering and 42" XZL's

the chassis was avariant of the Bedford MK chassis with the driver position & fork lift gear at the wrong end, The Air Despatch guys had lots of these when I was based at Lyneham in the late 70's.

Link to comment
Share on other sites

the chassis was avariant of the Bedford MK chassis with the driver position & fork lift gear at the wrong end, The Air Despatch guys had lots of these when I was based at Lyneham in the late 70's.

Whilt they may be on bedford axles the chassis is definately a cutom fabricated affair.

Link to comment
Share on other sites

Lewis -- Thats the forklift, its called an Eager Beaver, they were built for the Falklands war to be airlifted, they are quite an odd design - very long with the engine all the way back to remove the need for a counterbalance weight, its powered by a Perkins 4236 (?) and has four wheel hydro steering and 42" XZL's

They were around long before the Falklands war started, as I said earlier, at Lyneham 47 air despatch [the army guys who shove stuff out the back of Herks, used lots to load the aircraft & tow specialist trailers to move cargo

Link to comment
Share on other sites

Handy truck to have around.... but i wonder how they compare to todays H&S regs? ROPS anyone? :lol::lol:

I have seen one with a cab that looked original, but may have been a later addition

They were around long before the Falklands war started, as I said earlier, at Lyneham 47 air despatch [the army guys who shove stuff out the back of Herks, used lots to load the aircraft & tow specialist trailers to move cargo

OK, I'm not disputing your knowledge on the matter, I only wrote above what I was told

Link to comment
Share on other sites

Stage two: The Mezzanine floor

Build one section on the floor, then winch upright

SD531203.jpg

SD531202.jpg

SD531200.jpg

SD531199.jpg

SD531198.jpg

Then weld in the second section

SD531204.jpg

And winch the rear section into place, with some intricate rigging

SD531208.jpg

SD531205.jpg

SD531207.jpg

SD531208.jpg

SD531209.jpg

SD531213.jpg

Almsot there

SD531210.jpg

SD531212.jpg

Then the supports for the floor

SD531217.jpg

Not a bad use of the space :)

SD531215.jpg

Just needs boarding out now

Lewis :)

Link to comment
Share on other sites

ever so slightly disappointed you were on the ball enough to leave space to get the 90 out....... :P

seriously nice use of space, of course to get points back now you need to move all the heavy stuff up on to the mezzanine

Link to comment
Share on other sites

Or the digger . . .

Asuming I can master the art of controlling the slew without a functional slewring brake, the door has a nice dent from my previous attempts :rolleyes:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy