Stellaghost

About 30 minutes, took longer to set up with a dti Regards A smug shed dweller....lol

WOW, I got a real treat today My neighbours son works for a Landrover dealership he came to see his dad in this today HSE 130 300 ? Asked to have a look at it and he handed me the keys and told me to take it up the road First off it's massive, however it goes like s%%t off a stick, quiet info screen very clear, cabin spacious... Damn I wish I had the 90k to buy one....really I was very impressed at how good it was Regards Stephen

So had a wee bit play today with Previously made spline blank First set up then cutting, cuts are different lengths as I did not set up stop Best of all it fits fit is a bit slack as i cut too deep, however im very happy with the result, will do another blank test with depth and stop set then look to have a go on a mog shaft regards Stephen

Wow...I'm seriously impressed Thank you so much, if I can return the favour please let me know Regards Stephen

JB weld or plastic padding leak repair (10min cure) Regards Stephen Edit A piece of thin rubber and one jubilee clip will do if it's only a pin hole

Er SHUT UP.......lol The adaptor I will be making is to fit into the 3 jaw Regards Stephen

Ahem....... https://www.thistlycrosscider.co.uk/ Regards Stephen

Should be fine, have used this method before with success Regards Stephen

Unfortunately yes Blank test run will be easy enough However dividing head is 3 jaw Mog front shafts have a tee end This will need a 4 jaw chuck I have an old one I got off a handmade wood lathe donkeys ago Adaptor will need to be made so it fits into 3 jaw Then I have to make some spacers to get involute cutter to fit an R8 tool piece So I guess " now we wait" is about right...lol Regards Stephen

Happy days its arrived now i just need to play with it regards Stephen

@PaulMc forgot to send pictures Here they are now 4 connectors go into the ecu I need another end one like the one in the middle below thanks in advance regards Stephen

Here's me hoping you were all going to move to the Scottish borders, Englandshire side would do....lol Regards Stephen

Good lathe stock.... Regards Stephen

I've looked at them, however they only do one 17" at 31" tall , guess they might expand their range at some point in the future Regards Stephen

Was also looking at some 39.5 16.5 17 pitbull's, tyres only, just think they would be way too wide Regards Stephen

Looks like it's laid on a bed of magots.....lol Regards Stephen

As requested Regards Stephen

Been studying the pictures, one of the tyres looks to have aggressive side lugs, the other 4 do not in assuming these are m+s ones, assuming they will still be ok Regards Stephen

According to the web tread depth is 16mm and the centre can be re-cut to a depth of 10mm Regards Stephen

That seems deep, I measured a brand new bfg mud at just over 15mm Regards Stephen

Whilst their wheels are impressive they are not going to get me up the tracks at 7s......having said that nothing is getting me up there at the moment...... lol Regards Stephen Ps how deep are the treads on treps from new Regards Stephen

Thanks But I almost wish I hadn't asked.....lol Regards Stephen

@FridgeFreezer something heading your way in the post...... Don't ask.... Not telling ya......lol Regards Stephen

Yep TGT has a nice ring to it....... That's TALL if you struggling....lol Regards Stephen

Purely out of mischief.... Rotary table allows you to turn parts on a mill, my 1uz to LT77 adaptor was finished off with mill as lathe was too small......Regards Stephen