miketomcat
Settled In-
Posts
5,514 -
Joined
-
Last visited
-
Days Won
144
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by miketomcat
-
A come problem I've found with various battery tools (and mains for that matter) is the brushes get stuck. Whip them out and give it a clean often sorts it. Mike
-
Converting to rear discs on a 110
miketomcat replied to Adam001's topic in Defender Forum (1983 - 2016)
I used the same as western with no issue. I do recall pulling the shafts out a bit to fit the circlip they're not held in the diff so no problem with this. Mike -
I have in the past had good results cleaning it as you've said then painting with por15 before continuing to paint the whole car (etch, filler primer and top coat). This lasted for 6 years with no come back (I sold it at that point). The truck was recently for sale again and hadn't been repainted so I assume it's still going strong. Mike
-
And those still serving. Mike
-
It’s not OT it’s me LR diff workshop question
miketomcat replied to Hybrid_From_Hell's topic in International Forum
There's no way the led strip lights are 55w, we have some low bay lights at work they were 250w each. We've replaced the lamps with 70w led and they are now brighter. Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
That's a relief I was worried for a moment. Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
I have a question, what on earth are you going to do when this is finished? Clearly you get bored easy! Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
Yeah but that would be boring for us and I love what you do, it make me feel better about not being able to do much at the moment. Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
It'll look fine, yes you'll struggle to get them all perfectly in line and straight. By the time you've rattled a file around it and thrown some paint at it, it'll be straighter than the mesh version. To be fair you don't strike me as a concourse type of guy but it'll look neat and tidy. Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
Square peg in a round hole... Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
I have been known to super glue nuts to my finger to get them in tight spaces. Taping them into spanners is also common. Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
My wife understands my need to have a project on the go, unfortunately she's decided next year's project is an extension on the house. Mike -
can you convert a 2.5 NA to petrol ?
miketomcat replied to hurbie's topic in Modified Vehicle Builds & Special Projects
Not necessarily good, one with a knackered bottom end would work. Mike -
If it's made from 6mm folded steel and assuming it's braced back into the chassis legs properly then I see no reason why not. Mike
-
Defender valuation for insurance
miketomcat replied to Mossberg's topic in Defender Forum (1983 - 2016)
Unfortunately I tend to agree with smallfry. You can't really "add" value to a defender. You can make it more desirable but even then the value only comes from several people wanting it. Prices have definitely taken a slump recently, I think this is due to the trendy lot needing to buy electric cars to keep up with fashion . 6k might be a little low on current prices but unless it's special for some reason I doubt you would get more than 8k if you were to sell it. But what do I know? Mike -
I quite agree, I spent many years with my girlfriend at the time camping in a mini Marcos/jem. I reckon the smart has more room . Mike
-
What are the tubes stuck up on the rear quarters for, other than to fill with water. No wait I've got it, it's so you can push it..... To be fair it's does look quite funky but it's not really practical. Mike
-
can you convert a 2.5 NA to petrol ?
miketomcat replied to hurbie's topic in Modified Vehicle Builds & Special Projects
I would imagine it'll need petrol pistons and head at the very least, cam as well I suspect. Mike -
Mog 404 axles
miketomcat replied to Stellaghost's topic in Modified Vehicle Builds & Special Projects
What I love the most about this build is, it's being done on a driveway outside with a double garage that is only a workshop (as you can't get the car in there). Yes you have a good selection of tools but most are attainable by your average Joe, and yes you have a good skill set but again that's learnable. You sir are an inspiration to us all and for that I thank you. Now get on and finish it, I neeeeeed to see it finished. Mike -
Por 15 tank sealer is fine with diesel I painted 45's tank with it inside and out when we had it. I've also done the front tank on the 110 inside and out because it had a small weep and you can't get them anymore. Don't use fibreglass unless you can line the entire of the tank, essentially making a fibreglass tank inside and even then don't. Fairey power boats used to fibreglass over an aluminium tank now they all have diesel between the aluminium and fibreglass and need to be replaced. Mike
-
Hydro winch install musings
miketomcat replied to FridgeFreezer's topic in Modified Vehicle Builds & Special Projects
I think it's being mentioned in relation to driving a hydraulic pump rather than the winch directly. Mike -
This may help. https://forums.lr4x4.com/topic/87209-prop-lengths/?do=findComment&comment=752861 Mike
-
Very interesting keep it coming. Mike