Jump to content

bobtail4x4

Settled In
 View Profile  See their activity

  • Posts

    382

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by bobtail4x4

  1. bobtail4x4
    I bet you never go off road though?
  2. bobtail4x4
    You can change one of the ring pins for a padlock.
  3. bobtail4x4
    I saw Pete today, his phone never seems to stop ringing.
  4. bobtail4x4
    same as the cills on a range rover, there is a tech thread.
  5. bobtail4x4
    they had a nasty "habit" of copying other peoples work, having it made cheaply and selling for more to fools.
  6. bobtail4x4
    so cheap "orange" tat then?
  7. bobtail4x4
    What about the autopaint bloke in toll bar?
  8. bobtail4x4
    And Im looking for a td5 one, I have a tdi one here. swap?
  9. bobtail4x4
    Temporary structures are up to 28 days. are you going to move it that often? dont forget if its over 30m2 floor area it needs B Regs, whether it needs planning or not.
  10. bobtail4x4
    Look on ebay, most transport places will do it as a back load for about a pound a mile.
  11. bobtail4x4
    Im pretty sure they omitted the dipsticks and went to a filler bolt like manuals.
  12. bobtail4x4
    I dont think you can get the bearing seperate to the hub?
  13. bobtail4x4
    but I feel far safer in a disco than some euro tin box make out of a crisp packet.
  14. bobtail4x4
    Stainless steel cant be cut with Gas Im told. iv'e allways fancied afull lenth 100ft winch cable fastened very securly up near the hitch of the trailer and to something very solid behind it , curling it up out of sight i'd be a real shock to the system to get stopped instantly at 15miles an hour mine has a 3m chain just enough to make them stop, and hopefully enough noise.
  15. bobtail4x4
    we managed a caravan, our disco, and a visitors car, so you should be ok.
  16. bobtail4x4
    Im sure I used grease in my first Range Rover in the mid 90s. anyway take the drain plug out and see whats in.
  17. bobtail4x4
    yup. series ones had two bolts, and series 2s have one.
  18. bobtail4x4
    The garages were "supposed" to paint the filler plug yellow to show it had grease in.
  19. bobtail4x4
    weld a nut on it.
  20. bobtail4x4
    So we all agree then?
  21. bobtail4x4
    if you have any thread left to screw an old nut on, hit the nut, it saves spreading the stud end.
  22. bobtail4x4
    ORRP do like nipples tho
  23. bobtail4x4
    It is Richards, the trains run past, I dont think they fit them.
  24. bobtail4x4
    I have them on mine, they seem brighter, but I used led bulbs, (make sure you use directional ones, as there isnt a reflector.) the wires have 15 amp male ends that wont quite fit in the disco plug, a few wipes with a file and they do fit. one more thing, make sure you use sealant when fitting as they dont have body seals.
  25. bobtail4x4
    we aim to please
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept