Astro_Al Posted March 17, 2006 Share Posted March 17, 2006 Well it happens every time, and with 2 weeks to go, I figured its about time to post our parts searches / for sales, plus any meetings by the toilets etc. So, here's me. Actually the Rover content of my build is rapidly dwindling to naff-all squared, but I do have a few odds and sods I'll be looking for: 1. 'Deluxe' series bonnet. 2. Defender NON-PAS steering relay (new, I hope). 3. A fistful of ickle-diddy spotlights. 4. Something recovery-pointy, for front and rear. 5. Maybe some cheapo series rear wings in good nick. 6. Defender wing mirrors (new or VGC). 7. Rear load-space fixings/tie-downs. 8. Various tools and some more axle stands. 9. A full set of LED lights (not holding my breath on this). ...and a Simonr special key-ring jobber (in Orange, natch) if I can spot him... Oh, and a burger for Jez, with all the trimmings... Al. P.S. Will there be any stands selling blingy-orange-scrap there, and how are those little stickers coming along - can we get a sheet of them handed out to each car at the gate? Quote Link to comment Share on other sites More sharing options...
dollythelw Posted March 17, 2006 Share Posted March 17, 2006 Yay - panda burger with rambler relish! Quote Link to comment Share on other sites More sharing options...
landrover598 Posted March 17, 2006 Share Posted March 17, 2006 I'll be on the look out for set of cheap wheels a good defender upper and lower dash pannels possibly some tyres X-eng keyring maybe some suspension bits- depends whats there rear diff guard winch blanket Big stainless bow/dee shackle Rev counter for my TDi Don't really need most of it, but i'll keep an eye out. also buying a burger for Bish and hopefully collecting a transfer box from Fruity's messenger Quote Link to comment Share on other sites More sharing options...
Hillbilly Raider Posted March 17, 2006 Share Posted March 17, 2006 Stringy only goes for the burgers! Quote Link to comment Share on other sites More sharing options...
Steve King Posted March 17, 2006 Share Posted March 17, 2006 4. Something recovery-pointy, for front and rear. If you mean Jate ring type thingies I have a pair of 2nd hand ones going. I don't want a lot for them! Does anyone have an interior rear door grab handle for a Defender? I tried to get one at the last Sort Out but had no luck. Cheers Steve Quote Link to comment Share on other sites More sharing options...
gelf Posted March 17, 2006 Share Posted March 17, 2006 Im after a defender front panel........ cos i cut the other up to fit a winch. and a straight bumper for a defender......... cos me winch bumpers coming off. Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted March 17, 2006 Share Posted March 17, 2006 1off 285/75R16 Bronco Grizzly Claw (to replace the one 7Sisters ate) 1off 300Tdi Defender coolant header tank - as a 'nice to have' cos there's nothing explicitly wrong with the one I've got.. yet. Quote Link to comment Share on other sites More sharing options...
T1G UP Posted March 17, 2006 Share Posted March 17, 2006 110 rear body section? for my brother. Quote Link to comment Share on other sites More sharing options...
Mark90 Posted March 17, 2006 Share Posted March 17, 2006 A rear prop to fit my 90 2874 for sensible money...........................at Sodbury!!! But will probably buy all sorts of tat instead Quote Link to comment Share on other sites More sharing options...
BogMonster Posted March 17, 2006 Share Posted March 17, 2006 2874 for sensible money...........................at Sodbury!!! Is that like an 8274 but goes on the back? Quote Link to comment Share on other sites More sharing options...
steve_a Posted March 17, 2006 Share Posted March 17, 2006 Power steering pump for defender 200tdi probably a pair of series doors, the passenger door can be folded in half on the 90 where the frame snapped. window/door channel maybe some winch web for use as an extension A winch mount cradle thingy perhaps probably some ex military tat a bit of recovery stuff If any one is after a series 3 gearbox on a try and buy basis then I have one in Fareham, hants. I've decided it needs to go, that space can be took up by other tat Quote Link to comment Share on other sites More sharing options...
Petergg Posted March 17, 2006 Share Posted March 17, 2006 I will be after a fuel filler pipe and the body part for a defender 300tdi and tank mounting bracket, sender unit and a pump if any one has these bits let me know and I will meet you. Peter Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted March 17, 2006 Share Posted March 17, 2006 Does anyone have an interior rear door grab handle for a Defender? I tried to get one at the last Sort Out but had no luck.Cheers Steve Yeah, i've got one... removed the crappy weak perfectly good aluminium one from my 110 and fitted an (early? Military?) decent beefy non-bend steel type. Quote Link to comment Share on other sites More sharing options...
minivin Posted March 17, 2006 Share Posted March 17, 2006 Is that like an 8274 but goes on the back? it's only rated at 2,000lb pull Quote Link to comment Share on other sites More sharing options...
landrover598 Posted March 17, 2006 Share Posted March 17, 2006 it's only rated at 2,000lb pull Perfect for pulling the 90 back and forth along the drive ah Mark Quote Link to comment Share on other sites More sharing options...
minivin Posted March 17, 2006 Share Posted March 17, 2006 Looking for: Rear Defender 110 Salisbury Axle with removable calliper mounts and callipers, otherwise just bits on own. 13mm Plasma; depends if I get a good offer (doubt it) Pioneer tool kit (drop hitch is looking bare) MIL antenna bits front discs and bits, or stub axles and bits to play with a conversion I'm planning Quote Link to comment Share on other sites More sharing options...
ROGUE TROOPER Posted March 17, 2006 Share Posted March 17, 2006 Er..... as the wife will be with me this time I wont be buying anything!! But Im looking for...... Overdrive internal gear QT diff guard Les Henson hanging around the toilets Capstan parts Early S2 front valance (square type) Good set of SU's 3.9 EFI loom Hardtop seatbelt mounts Quote Link to comment Share on other sites More sharing options...
Hillbilly Rebel Posted March 17, 2006 Share Posted March 17, 2006 Am looking for half a dozen limestone 5 door soft top 109's with 200tdi engines already fitted. Anyone got some lurking around the shed/garage as carrying that lot around a muddy field whilst eating a couple of burgers could be a bit tricky and Mandy wont take too kindly if i chuck them in the back of the Raider! LOL! WELL YOU DID ASK! Quote Link to comment Share on other sites More sharing options...
white90 Posted March 18, 2006 Share Posted March 18, 2006 pair of wings for a defender 300TDI in white the outers skin will suffice. set of decent floor mats and seat box covering Quote Link to comment Share on other sites More sharing options...
white90 Posted March 18, 2006 Share Posted March 18, 2006 pair of wings for a defender 300TDI in white the outers skin will suffice. set of decent floor mats and seat box covering Quote Link to comment Share on other sites More sharing options...
Hillbilly Raider Posted March 18, 2006 Share Posted March 18, 2006 Am looking for half a dozen limestone 5 door soft top 109'swith 200tdi engines already fitted. Anyone got some lurking around the shed/garage as carrying that lot around a muddy field whilst eating a couple of burgers could be a bit tricky and Mandy wont take too kindly if i chuck them in the back of the Raider! LOL! WELL YOU DID ASK! Michael.... firstly (burgers) YOU ARE ON A DIET!!!! secondly( Raider) Thats what Tonks van is for! Yours The wife. Quote Link to comment Share on other sites More sharing options...
JSG Posted March 18, 2006 Share Posted March 18, 2006 I'll be on the look out for set of cheap wheels Dave, what sort of wheels are you after? I've got some 110 steel rims if you're interested. Very, very, very cheap. Quote Link to comment Share on other sites More sharing options...
landrover598 Posted March 18, 2006 Share Posted March 18, 2006 A mate is after some plain wheels for road tyres, I'll find out if standard wheels are ok (he did mention modulars) And another thing to add to my list, chequer plate wing tops B) Quote Link to comment Share on other sites More sharing options...
landrover598 Posted March 18, 2006 Share Posted March 18, 2006 Thanks for the offer John, but he definately wants modulars Quote Link to comment Share on other sites More sharing options...
MogLite Posted March 18, 2006 Share Posted March 18, 2006 Not much on my list thank god Diff lock and hi-low levers off an auto/LT230 rangie Tank guard for p38a (fat chance) Some carbide drills Possibly some hooks and chains Astro_al - I've got some neat tie downs out of a van if you want a look Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.