henk Posted October 11, 2019 Share Posted October 11, 2019 (edited) Bought some years ago a 110 that was involved in accident, so did a rebuild new chassis, new engine, new wings etc but only discovered later on that the driver hit the heater channel on the bulkhead with his knee and ruined it. 'warm' air arrived on the feet but nothing on the window. I found a dash with Bowy Odink with 3 cover plates So everything out The grey box is folded by hand in alu and connected to the blower. Two holes on top to go to the left and right part of the front window Later on I added 2 small holes at the sides that go to the left and right of the dash as demister for the windows in the doors A first presentation to see if everything fits The black box in the middle I found in Newbury, but the gearstick needs to be bent a bit A first mockup, position of speedo is due to the lack of depth because of the airtube behind Still using the original TD5 switches and the holder for them The blower is now via a pwm and works very good Some weeks later I found a double din radio with Carplay and input for front and rear camera so changed layout again Next step is to fit the tripmaster and some other stuff Edited October 11, 2019 by henk 1 Quote Link to comment Share on other sites More sharing options...
Arjan Posted October 11, 2019 Share Posted October 11, 2019 Looks good ! Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 11, 2019 Share Posted October 11, 2019 You see to have put the steering wheel on the wrong side You also seem to have a lot of compressors and air lockers Looks really good work, dashboards are hard to do without looking bodged but thats tidy! Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 11, 2019 Share Posted October 11, 2019 That looks great Henk! Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted October 13, 2019 Share Posted October 13, 2019 Looks great , just doing a custom dash on my 90 . Quote Link to comment Share on other sites More sharing options...
Anderzander Posted October 13, 2019 Share Posted October 13, 2019 I really like how easy that is to strip out and change or service. Having 3 panels like that is a great design 👍🏻 On 10/11/2019 at 12:10 PM, Cynic-al said: You also seem to have a lot of compressors and air lockers Is it an 8 wheeler ? 😮 Quote Link to comment Share on other sites More sharing options...
henk Posted October 13, 2019 Author Share Posted October 13, 2019 Position of the panels is maybe not 100%, but indeed 3 panels makes it a lot easier to access for example the wiper motor. I suggested to make new dash versions deeper at the top resulting in more vertical instruments but then you have more space for the window ventilation and more depth for double din radio and cb Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 14, 2019 Share Posted October 14, 2019 On 10/13/2019 at 9:45 AM, Anderzander said: Is it an 8 wheeler ? 😮 That's just greedy! Quote Link to comment Share on other sites More sharing options...
Anderzander Posted October 14, 2019 Share Posted October 14, 2019 2 hours ago, Cynic-al said: That's just greedy! I wouldn’t want to pay for his tyres ! 1 Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 15, 2019 Share Posted October 15, 2019 I wonder how well it steers? Must fight it! Atleast he's not overloading the axles Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 15, 2019 Share Posted October 15, 2019 1 hour ago, Cynic-al said: I wonder how well it steers? Must fight it! Atleast he's not overloading the axles IT was apparently (and quite obviously) a total pig, just wanting to go in a straight line all the time. Classic case of 'form' over function. Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 16, 2019 Share Posted October 16, 2019 It's an advertising tool and it gets attention 🤷♂️ Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted October 16, 2019 Share Posted October 16, 2019 1 hour ago, Cynic-al said: It's an advertising tool and it gets attention 🤷♂️ Yeah, it makes me think "what a prat, bet he'd sell any old cack" 1 Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 16, 2019 Share Posted October 16, 2019 1 hour ago, Cynic-al said: It's an advertising tool and it gets attention 🤷♂️ Was Until it all got wound up as if I remember correctly the couple that owned it had been embezzling money from her family or something? Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 16, 2019 Share Posted October 16, 2019 1 hour ago, landroversforever said: Was Until it all got wound up as if I remember correctly the couple that owned it had been embezzling money from her family or something? Well everyone likes a bit of cream! 1 hour ago, FridgeFreezer said: Yeah, it makes me think "what a prat, bet he'd sell any old cack" It didn't have any orange parts or the word extreem on it, that's why you don't like it. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted October 16, 2019 Share Posted October 16, 2019 Just now, Cynic-al said: It didn't have any orange parts or the word extreem on it, that's why you don't like it. now I'm wondering if this is the same guy that had the D2 on Unimog axles that was about 10ft tall and equally stupid? Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 16, 2019 Share Posted October 16, 2019 (edited) Maybe they decided he needed a little comfort? Still, if they enjoy building then why not, probably better than what I turn out What was the thread about again Edited October 16, 2019 by Cynic-al Quote Link to comment Share on other sites More sharing options...
steve b Posted October 16, 2019 Share Posted October 16, 2019 As a final aside , I noticed Richards Chassis have a 6x6 90 galv. chassis in the clearance section due to a cancelled order ... I like what you're putting together there Henk , very tidy. cheers Steve b Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 16, 2019 Share Posted October 16, 2019 26 minutes ago, FridgeFreezer said: now I'm wondering if this is the same guy that had the D2 on Unimog axles that was about 10ft tall and equally stupid? It was! Green one with a bright orange extreeeeeeeeeme cage! This was the issue: https://www.shropshirestar.com/news/crime/2017/07/15/woman-jailed-for-600000-family-firm-fraud-/ Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 18, 2019 Share Posted October 18, 2019 250 hours unpaid work for £660,000 is alright! A lady in our village got 100 hours for £30,000 benefit fraud and I thought that was good at £30 an hour after deductions. My Range Rover went down that way, think it was frome though. Maybe he could max extreeem it like I never could Quote Link to comment Share on other sites More sharing options...
Nonimouse Posted October 18, 2019 Share Posted October 18, 2019 2 hours ago, Cynic-al said: My Range Rover went down that way, think it was frome though. Maybe he could max extreeem it like I never could Frome is in Somerset... Shropshire is in The North Huge difference Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 21, 2019 Share Posted October 21, 2019 In the North? Oh no, nothing South of Doncaster is the North, it's all darn sarf to us Quote Link to comment Share on other sites More sharing options...
Nonimouse Posted October 21, 2019 Share Posted October 21, 2019 4 hours ago, Cynic-al said: In the North? Oh no, nothing South of Doncaster is the North, it's all darn sarf to us Anything North of the M4 is North; and as such grim, dark, satanic and brooding, full of whippets, ferrets and rather pleasant beer 1 Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted October 21, 2019 Share Posted October 21, 2019 We will have to compromise that anything between the M4 and Doncaster is the Midlands, where they have funny accents, strange pass times and extra toes. I think this will be where your satanic brooding is also based, as the folk north of Doncaster wouldn't entertain such nonsense, we don't have time between the ferreting, pigeon fancying and badger baiting. Quote Link to comment Share on other sites More sharing options...
Nonimouse Posted October 22, 2019 Share Posted October 22, 2019 22 hours ago, Cynic-al said: We will have to compromise that anything between the M4 and Doncaster is the Midlands, where they have funny accents, strange pass times and extra toes. I think this will be where your satanic brooding is also based, as the folk north of Doncaster wouldn't entertain such nonsense, we don't have time between the ferreting, pigeon fancying and badger baiting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.