Jump to content

Does John Craddock Supply Britpart?


stuck

Recommended Posts

No idea. But a website design as bad as John Craddocks I’m afraid doesn’t get my business!

LR Direct offer you a choice of the supplier of the bits so you can choose – that’s currently my supplier of choice (as well as Christian Autos local to me).

No hidden agenda, just a satisfied customer of the two mentioned.

Link to comment
Share on other sites

No idea. But a website design as bad as John Craddocks I'm afraid doesn't get my business!

LR Direct offer you a choice of the supplier of the bits so you can choose that's currently my supplier of choice (as well as Christian Autos local to me).

No hidden agenda, just a satisfied customer of the two mentioned.

Totally agree webiste is utter pants, LRseries, or britcar amongst others are good for giving a choice of what you want.

Link to comment
Share on other sites

I went to DLS and Paddocks-In Matlock over the last weekend as i was in nottingham visiting family up there and needed some bits urgently, the guy behind DLS's shop counter was mega helpful and agreed that britpart were bad, I was astounded that when I went through the door of the place all i saw was britpart everywhere-why do they do it it's rubbish I did'nt know wether to walk out or carry on asking for what I needed-luckily they had some genuine lucas indicator switches for my 90 on the shelf, and with paddocks the amount of people walking out with britpart made me cringe, the young guy behind the counter was a little bit amused to say the least that I asked for "No britpart please" as I think even they realise now It's rubbish

Buy cheap buy twice!!

John

Link to comment
Share on other sites

If you email craddocks direct and tell them you want proper stuff then you'll get it. I've nothing but good experience with craddocks. I now use AMD 4x4 and they dont sell any blue box stuff unless you ask for it.. I use

Most of the stuff you got me from AMD last time was Britpart, they just cut off the blue sticker.

Link to comment
Share on other sites

I didn't want to start a Britpart debate.

Through experience I've learn't that if it rotates, seals something or is safety critical not to rely on Britpart, yes their stuff is cheap but IMHO it's cheap for a reason.

The reason for the post was I've never used JC's so wasn't sure what they supplied.

Cheers,

Mick.

Link to comment
Share on other sites

Defo mostly britpart and their not the cheapest around either. Mind its amazing how many suppliers out there actually send out britpart stuff, thats why now i mainly us LRseries or britpart. Not that im suggesting britparts bad, in my experience with their stuff its never let me down.

Link to comment
Share on other sites

I've never had good experiences with JC, and a friend with a series 1 now avoids, after countless trips from worcester to cannock, after phoning in advance to see if they had XYZ on the shelf, only to get there and find its the wrong part or its not on the shelf.

LRSeries are my prefered supplier these days, then LRDirect - both of whom offer choices of manufacturer, and then AMD in Leicester, but last time I looked their website was still down.

Link to comment
Share on other sites

LRSeries are my prefered supplier these days, then LRDirect - both of whom offer choices of manufacturer, and then AMD in Leicester, but last time I looked their website was still down.

LR Series I have used in the past, having discovered that their 'customer relations' department is headed up by Atilla the Hun I now use Britcar who I find very good. Britpart's website now features a 'chat box' so you can get to communicate with someone 'real-time' if you need help.

Julian

Link to comment
Share on other sites

Don't see the point in that when you can ask on a forum pick up the phone :blink:

I have phoned in the past and I've found them obviously busy and feel like I'm a hindrance with some daft enquiry. 'Live Chat' is good as they can reply as and when able and also it's free unlike the phone. I have Luddite tendencies too, but in this case I'd say 'don't knock it 'til you've tried it!'

It seems to be getting more common now, on this site that I use (if memory serves) http://www.4secondsflat.com/ a little box pops up with 'Hi I'm Larry, can I be of assistance?' You can ignore it if you wish.

Julian.

Link to comment
Share on other sites

Just found a place called dingocroft which is a fairly odd name. But it has Delphi wheel cylinders and girling kits by the picture. I bought Craddock Britpart ones the other day as I don't know wherer to get the steel ones anymore.

Are they really going to be a proper make on an on-line web site?

I got so fed up with parabolic spring choce on-line I went 15 mile down the road to Jones springs. I might get a kicking, but at least I know where to complain ;)

(Actually, they are exactly what I wanted in rating)

You'ld be amazed who supplies Britpart with stock. Thats why some stuff is good. Its just knowing which.....

Link to comment
Share on other sites

No idea. But a website design as bad as John Craddocks I'm afraid doesn't get my business!

a face to face customer service so bad as at craddocks wont ever get my business again, especially when i was after a set of 4 wheels and tyres, some £600+ worth of business, they were rood at best. told me i wasnt aloud a certain tyre size.

Britcar for me., Craddocks/Paddocks are pants IMHO !

agreed! britcar are good. especially if you are searching by part number, and they will offer Genuine and pattern parts.

I went to DLS and Paddocks-In Matlock over the last weekend as i was in nottingham visiting family up there and needed some bits urgently, the guy behind DLS's shop counter was mega helpful and agreed that britpart were bad, I was astounded that when I went through the door of the place all i saw was britpart everywhere-why do they do it it's rubbish I did'nt know wether to walk out or carry on asking for what I needed-luckily they had some genuine lucas indicator switches for my 90 on the shelf, and with paddocks the amount of people walking out with britpart made me cringe, the young guy behind the counter was a little bit amused to say the least that I asked for "No britpart please" as I think even they realise now It's rubbish

Buy cheap buy twice!!

John

DLS is my local, at 5 miles away, i will buy parts, as their service is good, but i wont go there for MOT's after they told me all 4 wheel bearings needed replacing when it was just the sound of the brake shoe touching the drums. and that from a specialist...

My ideal parts, and advice place, especially for series vehicles, but also for any other model, is John Richards in Hinstock, hands down. at less than 7 miles from uni, and with great customer service, especially for frequent repeat buyers, and club, (well harper adams) parts discount. and they dont even supply britpart wheelbearings anymore!!!

Link to comment
Share on other sites

  • 2 weeks later...

Dingocroft are pretty local to me - they are very helpful if you call them up, and really know their stuff. Some of the stuff does come in blue boxes, but if you ask when you order you can probably get an alternative...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy