Jump to content

Mo Murphy

Settled In
 View Profile  See their activity

  • Posts

    9,362

  • Joined

  • Last visited

  • Days Won

    93

 Content Type 

Everything posted by Mo Murphy

  1. Mo Murphy
    That's the Johnnies, much obliged Ralphers old boy ! I wonder if anyone knows where I can buy a bag of 100 rather than singly ? Mo
  2. Mo Murphy
    Some of those plastic brake pipe clips that are secured with a cable tie, as used on the rear axle ? Mo
  3. Mo Murphy
    Evening Gents, As above, what are you using and does it do it's job ? Mo
  4. Mo Murphy
    Red90 One uses a heavy duty rod with a guard because on full lock plenty of the rod is exposed and is vulnerable to damage. I have one of JST's cast off guards on mine
  5. Mo Murphy
    Defender looks and is better as long as it's not a barge Mo
  6. Mo Murphy
    Splendid
  7. Mo Murphy
    Slave cylinder James ! Bit of a result really, it could have been far worse ! Mo
  8. Mo Murphy
    You'll need to let the air out sharpy, the bleed nipple is on top of the steering box (it looks a bit like a grease nipple). Mo
  9. Mo Murphy
    It's spring tension. Once you've had experience of them Ross, you'll wonder how you ever managed without them Mo
  10. Mo Murphy
    Why not Ross, what's suspect about them ? I personally wouldn't hesitate. Mo
  11. Mo Murphy
    You do realise, Steve, that Nige won't allow anything less than 30mm plate on his 90 so you may have to find a bit of 1/4 plate to weld on top. Mo
  12. Mo Murphy
    A V8 is always going to be lighter, it's got more holes in it Mo
  13. Mo Murphy
    Longer than I care to remember Ross Still this care home is nice and they let me go on the internet from time to time During the waaaooorrr ... Mo
  14. Mo Murphy
    That's because you're only 14 Ross Mo
  15. Mo Murphy
    Use a thin chisel or screwdriver under the head (you may well have to hammer it in ) to lever the bolt out whilst turning it. Mo
  16. Mo Murphy
    Probably because it was cheaper to make, so bigger profit margin ! Mo
  17. Mo Murphy
    This happened to mine Paul ! One morning when I started it, there was a bang, I lifted the bonnet and the shaft had sheared I found the pulley and end of the shaft on top of the inner wing Mo
  18. Mo Murphy
    No, not just you Mickey Backdate works a treat Good tip Sacha Mo
  19. Mo Murphy
    I'll take one or two off you James, only 4997 to get shot of then Mo
  20. Mo Murphy
    Something just doesn't look quite right about these but I can see the appeal. Mo
  21. Mo Murphy
    Nice one Sasha I've needed to set the time delay to return to correct time to 15 seconds, others may find the same. HTH Mo
  22. Mo Murphy
    I'm happy to trial the new swb on an extended basis and my fees are really quite modest. Would you mind feeding that back for me Good luck with your research, James, I look forward to what you've got to show us Mo
  23. Mo Murphy
    You want to be more careful with that screwdriver, Les Mo
  24. Mo Murphy
    Thanks Guys, Paul got it again I thought it was Dingocroft but I couldn't find them, retraining required methinks Much obliged Mo
  25. Mo Murphy
    Because I was too stupid to save the link when I saw it posted before and now I can't find it Pretty please Mo
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept