Hybrid_From_Hell Posted April 12, 2014 Share Posted April 12, 2014 One for the Sparkies ! In the workshop I have a large number of 4 5 6 ft flouresent tube lights....never seems bright enough Have just been fitting new lights in the bathroom, these are 10 watt 35 degree LED and CHRIST they are bright ! Just wondering, with modern technology what might be good for a workshop vs Flouresent Tubes ??Nige Quote Link to comment Share on other sites More sharing options...
Jon White Posted April 12, 2014 Share Posted April 12, 2014 Led panels are good and very slimline, but they ain't cheap! Jon Quote Link to comment Share on other sites More sharing options...
petes landy88 Posted April 12, 2014 Share Posted April 12, 2014 In work, we put in 20 Phillips Led fluorescent style 5 ft fittings to replace existing 5 ft 's - very good light output, 1/2 the energy cost, payback in 2 years (on 24/7) Fittings worked out at £100 each with 3 year on site warranty. Pete. Quote Link to comment Share on other sites More sharing options...
mickeyw Posted April 12, 2014 Share Posted April 12, 2014 Before you spend too much, replace a couple of tubes with new ones. You'll be surprised how much brightness fluro tubes lose over time. 2 Quote Link to comment Share on other sites More sharing options...
Cynic-al Posted April 12, 2014 Share Posted April 12, 2014 The hf ones are better than the standard ones to work to, I find strip lights are about the best thing to work to as you don't get the patchiness and or shadows like you get with direct lights. If your serious about the leds there is a regular electrical auction in goole that had loads in the last catalogue I saw. Think they're on bid spotter or lot surf. Quote Link to comment Share on other sites More sharing options...
dirtydiesel Posted April 12, 2014 Share Posted April 12, 2014 You just need more tubes Nige, I have 6x5 foot and 20x4 foot single tubes in 55'x16' workshop and its really bright with very few shadows. We've also painted all the walls white which helps. Or it could just be that you have too much treasure absorbing/obscuring your lighting? Quote Link to comment Share on other sites More sharing options...
miketomcat Posted April 13, 2014 Share Posted April 13, 2014 Have you tried cleaning the tubes/covers they get dirty quite quickly but you never notice until you clean them. Mike 1 Quote Link to comment Share on other sites More sharing options...
Boydie Posted April 13, 2014 Share Posted April 13, 2014 I have floro's in my man shed, 6 x 80 (twin 40 watters) overhead and 6 x 40 watt at ground level, until the latter turn on it looks quite ordinary, once the low level ones are turned on however all shadows go and the light intencity is brilliant, ---- most people forget about low level lighting where most times its most needed. Quote Link to comment Share on other sites More sharing options...
CwazyWabbit Posted April 13, 2014 Share Posted April 13, 2014 How are your low level ones defended from breakage Mr Boyd? Quote Link to comment Share on other sites More sharing options...
landroversforever Posted April 13, 2014 Share Posted April 13, 2014 Get yourself some new daylight tubes Nige. The tubes will have degraded over time. My workshop has 4x 5ft HF twins and 3x 2ft HF twins over the workbench (plus a 6ft twin that was already there). Loads of light, really helped by the light walls and floor. Quote Link to comment Share on other sites More sharing options...
jonost24 Posted April 18, 2014 Share Posted April 18, 2014 I've got a couple of 400w security lights wired into the garage. Great light, but can create shadows without additional lighting. Cheap to buy Quote Link to comment Share on other sites More sharing options...
skauldy Posted April 18, 2014 Share Posted April 18, 2014 I bought last week 100 600x600 Thor led panels. Data shows I should halve my consumption but after one week it's not good. 17k it cost to install. Quote Link to comment Share on other sites More sharing options...
jbs Posted April 19, 2014 Share Posted April 19, 2014 Paint the inside of your garage white-it makes a hell of a difference and do the ceiling whilst your at it too John Quote Link to comment Share on other sites More sharing options...
robertspark Posted April 19, 2014 Share Posted April 19, 2014 second that painting the walls white, works well in mine, you will be surprised how much light you loose with grey walls. I use 4 x 70W fittings and my garage is about 7.5 x 5m, changed one 70W lamp reciently and it's amazing the light output increase from one relamping. You are suppose to clean the lamps too, I know mine had a good coating of dust on the top of the tubes (sandblasing, grinding etc). Quote Link to comment Share on other sites More sharing options...
oddballrovers Posted April 20, 2014 Share Posted April 20, 2014 I'd say as the others, paint white, run half cool white and daylight tubes, clean them once a year, we have on 40m2 9 double 5' Armatures plus double ones right over the workbench, you have to read on the tubes what light the give, if you know some one who works at a hospital, then they might be able to supply you with the onec they use, as they have a very good colour as I remember they are 98% close to give the right colour. Or you can nick them, at one off your frekvent visits there.....ops Hat and coat, I am gone.....:-D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.