steve_a Posted March 28, 2007 Share Posted March 28, 2007 Right thought I'd get this one in, or should it be on getting out? Who knows... Who's going and whatcha after. Not after much, the hope of emigrating is curbing my desire to fill the garden, shed and garage with really useful land rover parts, so I shall perhaps be after: o Half decent series doors (gonna be topless in Oz if I take the 90) o Front/Rear radius arms perhaps, to just crank them a bit o Some propshafts (home made double cardan prop might get made) o Tooooolsss Should really get an x-eng hand brake before I scoot next year, but I keep putting it off... Quote Link to comment Share on other sites More sharing options...
western Posted March 28, 2007 Share Posted March 28, 2007 Should really get an x-eng hand brake before I scoot next year, but I keep putting it off...[ /quote]see my thread here ref fitting one of these x-brakes & when you order one from X-ENG use the link at the bottom of Si's signature in any of his posts. Quote Link to comment Share on other sites More sharing options...
BigSi110 Posted March 29, 2007 Share Posted March 29, 2007 Well, I've got a desire for more gauges. Just bought a genuine set of oil temp and pressure gauges from eBay and need a few more so that I can buy the MudStuff dash binnacle. Plus the sender units. That'd be useful.... Rear boot carpet that goes over the wheelarches - then I can remove the rear side seats from my 110 and make the boot a bit bigger. Other than that, just a walk round. 'Course, if I find a set of doors with no corrosion...... Mine have just started to bubble. Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted March 29, 2007 Share Posted March 29, 2007 I'll be going for a wander around... i've missed the last three, but judging by the state of my bank account, walking around will be all i'm doing! Quote Link to comment Share on other sites More sharing options...
jules Posted March 29, 2007 Share Posted March 29, 2007 I will be heading up there to get some Garage space from all the stuff I had stock piled for the tomcat build which I no longer need. There is not much I need only shiny replacement bits for my D2 The only thing I really want is s compressor/supercharger for my collection of V8's but I doubt I will find one there and my knowledge of them is limited Quote Link to comment Share on other sites More sharing options...
ROGUE TROOPER Posted March 29, 2007 Share Posted March 29, 2007 Im looking for stuff! S2A wiper motor blanking plate (a couple of them) Complete S2/3 throttle linkage inc bar and pedel Knacked tubular manifolds for butchering QT wrap around Diff slider Thats it so far! Quote Link to comment Share on other sites More sharing options...
will_warne Posted March 29, 2007 Share Posted March 29, 2007 I've got a load of stuff to get rid of however I'm looking for a few bits: - A straight rear axle casing - '02 dash bits in good condition - Chrome swivels - An 8274 / Bellview that's not stupidly priced - Anything that catches my eye Jamie, I still owe you for those brake parts. It'll at least give you £50 to go crazy with Quote Link to comment Share on other sites More sharing options...
GBMUD Posted March 29, 2007 Share Posted March 29, 2007 I've got a load of stuff to get rid of however I'm looking for a few bits:- A straight rear axle casing Better see me then. Yours for nowt. I may be able to help on the swivels too. Chris Quote Link to comment Share on other sites More sharing options...
dollythelw Posted March 29, 2007 Share Posted March 29, 2007 I was hoping to find Astro Al - he skipped out of burger buying duties at the last Sodbury Quote Link to comment Share on other sites More sharing options...
reads90 Posted March 29, 2007 Share Posted March 29, 2007 I will be heading up there to get some Garage space from all the stuff I had stock piled for the tomcat build which I no longer need.There is not much I need only shiny replacement bits for my D2 The only thing I really want is s compressor/supercharger for my collection of V8's but I doubt I will find one there and my knowledge of them is limited Oh Jules And don't forget to have a look for some Gen disco 1 seat covers for me Cheers Quote Link to comment Share on other sites More sharing options...
Lewis Posted March 29, 2007 Share Posted March 29, 2007 Will, my project 8274 may be for sale, wont include the wide drum or twin motor top housing as neither are finished properly and I want to keep them for the 110 I also have a standard 8074 I could be persuded to part with either for the right price Lewis Quote Link to comment Share on other sites More sharing options...
white90 Posted March 29, 2007 Share Posted March 29, 2007 wntd: headlamp surrounds 300TDI rubber floor mats 300TDI Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted March 29, 2007 Share Posted March 29, 2007 Jamie, I still owe you for those brake parts. It'll at least give you £50 to go crazy with Cheers Will... woohoo.. i can buy some burgers now!! you want me to bring the stuff with me? Quote Link to comment Share on other sites More sharing options...
Jon White Posted March 29, 2007 Share Posted March 29, 2007 The only thing I really want is s compressor/supercharger for my collection of V8's but I doubt I will find one there and my knowledge of them is limited I saw a couple of Wade Ro34's for sale there last time. You need to be careful as its easy to by something thats effectively scrap. Also bear in mind that manifolds, drive pulleys etc can easily cost you more than the blower itself does! Avoid the Eaton blowers at all costs. Jon Quote Link to comment Share on other sites More sharing options...
will_warne Posted March 29, 2007 Share Posted March 29, 2007 Cheers Will... woohoo.. i can buy some burgers now!! you want me to bring the stuff with me? Yeah, that'd be great. Better see me then. Yours for nowt.I may be able to help on the swivels too. Chris Thanks Chris. If you don't want cash I'll sort you out with a burger! Will, my project 8274 may be for sale, wont include the wide drum or twin motor top housing as neither are finished properly and I want to keep them for the 110I also have a standard 8074 I could be persuded to part with either for the right price Lewis We'll need to have a chat then as that might be perfect. Quote Link to comment Share on other sites More sharing options...
freeagent Posted March 29, 2007 Share Posted March 29, 2007 I'm after a pair of chrome swivels (later type, bearings top and bottom) must be rust free a couple of Kumho / Marshall powerguard tyres in 205/16 flavor (preferably in as new condition) a pair of rear trailing arms, as I want to sleeve them, to beef them up a bit..... don't need cranked ones as got standard height suspension. possibly a disco tank guard if cheap enough........ plus whatever else catches my eye.... Quote Link to comment Share on other sites More sharing options...
Astro_Al Posted March 29, 2007 Share Posted March 29, 2007 I was hoping to find Astro Al - he skipped out of burger buying duties at the last Sodbury As much as I'd love to buy everyone I've ever met, and some I haven't, burgers again, sadly I can't make this one either. I'll be practicing my other hobby ... I've got a big list of bits I need too, dammit. Next time I promise, polar bear burgers with extra grated penguin. Al. Quote Link to comment Share on other sites More sharing options...
ROGUE TROOPER Posted March 29, 2007 Share Posted March 29, 2007 I've got a big list of bits I need too, dammit. Like what? You never know maybe we will come across it............. Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted March 29, 2007 Share Posted March 29, 2007 A pair of 300Disco rear bumper lights, the rectangular stop/tail ones, with bulb holders ideally. And a walk round and a chat. Quote Link to comment Share on other sites More sharing options...
Adrian Turner Posted March 29, 2007 Share Posted March 29, 2007 I'll be there with Pigster as he want to sell some stuff.......so look out for the big iveco van with Chestnut Landscapes on the side's...... that'll be us! Lewis, if Will's not interested in your 8274....pop over to me! i no a man who's after one! Quote Link to comment Share on other sites More sharing options...
Countax Posted March 29, 2007 Share Posted March 29, 2007 A set of hood sticks, header rail and side opening tailgate for a 90 are on my shopping list. Nigel Quote Link to comment Share on other sites More sharing options...
Les Brock Posted March 29, 2007 Share Posted March 29, 2007 More military lights Repair kits for the 8274's and another motor...not that i'm likely to find any I'd kind of like to see if a 90 tank will fit under mine, to free more space in the back All provided I can get away for the day, as I'm away in the pikey van with the tribe A new backplate from Si for my X-brake so I can fit the underdrive Oh........ and some Turnips to throw at Pigster Quote Link to comment Share on other sites More sharing options...
MogLite Posted March 29, 2007 Share Posted March 29, 2007 I'll be there clearing junk out of the garage if all goes to plan. As I'll be there in my Isuzu BigHorn - I should stick out like a sore thumb Not got much on the shopping list, an Allbright solenoid, and a dirt cheap ali fairlead for a demountable winch project should do it. Quote Link to comment Share on other sites More sharing options...
OilIT Posted April 1, 2007 Share Posted April 1, 2007 set of front seats for the defender (unless i can find a good drivers a middle only!) set of good doors set of hinges a 90 300 tdi floor and tunnel mat set pair of sliding side windows good nsf 300 tdi wing + any other stuff which i dont need but for some reason think might be worth paying for Quote Link to comment Share on other sites More sharing options...
pigster Posted April 1, 2007 Share Posted April 1, 2007 Turnips - er... what ever floats your boat I suppose... you could always throw pies instead... and some Turnips to throw at Pigster Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.