Stellaghost Posted September 30, 2021 Author Share Posted September 30, 2021 (edited) 2 hours ago, landroversforever said: I misunderstood earlier then... I thought it was chat about Extreme4x4 rather than Devon. You are correct I was trying to contact extreme 4x4........ However if they don't pick up the phone, don't complain when you lose a sale 2 hours ago, Nonimouse said: If you have issues getting through to Devon 4x4, my Stepbrother is service manager down there now, so let me know... Never had any issues speaking to Devon 4x4 2 hours ago, Nonimouse said: But for the last 7 years I've been running Raw4x4 Nitro Max. 50k miles and when they go I will look at Raw 4x4 again - without doubt the best shocks I have ever used. Is there a UK stocking for these not seeing them on super pro's web site regards Stephen Edited September 30, 2021 by Stellaghost 1 Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted September 30, 2021 Share Posted September 30, 2021 13 minutes ago, Stellaghost said: Is there a UK stocking for these not seeing them on super pro's web site regards Stephen There's an Italian site listing them, which points you to superpro uk site as a reseller, but as you say, nothing on there. http://raw4x4europe.com/nitromax_en.htm Perhaps worth a call to superpro? See if they pick the phone up Quote Link to comment Share on other sites More sharing options...
Nonimouse Posted September 30, 2021 Share Posted September 30, 2021 28 minutes ago, Stellaghost said: Is there a UK stocking for these not seeing them on super pro's web site regards Stephen SuperPro can get them if you require - but it's not stock they hold SuperPro Australia is part of Fulcrum Suspensions Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted October 1, 2021 Author Share Posted October 1, 2021 E mailed extreme 4x4 last night First sentence being would be nice if you picked up the phone... Lo and behold I got a reply this morning, no apology but they did confirm there shocks are rebuildable and they stock spares More food for thought I do like the look of these also they look to have spherical fitment as appose to pin and I did track down a review that was very positive regards Stephen Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 1, 2021 Share Posted October 1, 2021 With those ones though, are they giving you a brand name for the shocks? Back in the Scrapiron days, they'd sell someones product for a while and then miraculously start selling their own version shortly after. 1 Quote Link to comment Share on other sites More sharing options...
Nonimouse Posted October 1, 2021 Share Posted October 1, 2021 Pro-comp make dampers for a number of other companies When I look at the Extreme 4x4 stuff, I am reminded of this: https://www.amazon.com/MX6-SERIES-SHOCK-REMOTE-RESERVOIR/dp/B000CNIPMU Quote Link to comment Share on other sites More sharing options...
Popular Post Stellaghost Posted October 1, 2021 Author Popular Post Share Posted October 1, 2021 Well I reckon I've come to a decision..... Going to build up with a spare set of pro comps.. Then lash out on a set of Fox remote reservoir shocks I trust this meets with your approval lol regards Stephen 4 1 Quote Link to comment Share on other sites More sharing options...
Anderzander Posted October 1, 2021 Share Posted October 1, 2021 Approved ✅ Please continue. ASAP Quote Link to comment Share on other sites More sharing options...
Daan Posted October 1, 2021 Share Posted October 1, 2021 43 minutes ago, Stellaghost said: Well I reckon I've come to a decision..... Going to build up with a spare set of pro comps.. Then lash out on a set of Fox remote reservoir shocks I trust this meets with your approval lol regards Stephen Well, at this rate, your car is going to be all my fault. Every part of it! 1 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted October 1, 2021 Author Share Posted October 1, 2021 Just now, Daan said: Well, at this rate, your car is going to be all my fault. Every part of it! You my friend have a lot to bloody answer to .......... Regards Stephen 1 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted October 14, 2021 Author Share Posted October 14, 2021 Momentum slowed a wee bit, domestic or divorce duties taking precedence lol So managed a wee bit on radius arm to axle mounts CAD onto 6mm plate Cut out with grinder and plasma cleaned up and test fitted radius arm end in position so you can see where I'm going regards Stephen 3 Quote Link to comment Share on other sites More sharing options...
Wytze Posted October 14, 2021 Share Posted October 14, 2021 Whoop...! He's back!! 1 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted October 14, 2021 Author Share Posted October 14, 2021 16 minutes ago, Wytze said: Whoop...! He's back!! How sweet...... Did you miss me.......... Regards Stephen Quote Link to comment Share on other sites More sharing options...
Anderzander Posted October 14, 2021 Share Posted October 14, 2021 Big time 1 Quote Link to comment Share on other sites More sharing options...
Wytze Posted October 14, 2021 Share Posted October 14, 2021 As above, need to see your's done. Like i want to get mine mot'd 1 Quote Link to comment Share on other sites More sharing options...
Anderzander Posted October 14, 2021 Share Posted October 14, 2021 I can’t wait to see these complete and in paint ! Quote Link to comment Share on other sites More sharing options...
L19MUD Posted October 14, 2021 Share Posted October 14, 2021 2 hours ago, Anderzander said: I can’t wait to see these complete and in paint ! forget that! I want to see them painted and under the Lightweight! 1 Quote Link to comment Share on other sites More sharing options...
bishbosh Posted October 15, 2021 Share Posted October 15, 2021 Thank goodness! He's finally stopped worrying about flippin shock absorbers and gone back to making things! Hooray! 😛 1 1 Quote Link to comment Share on other sites More sharing options...
cackshifter Posted October 15, 2021 Share Posted October 15, 2021 Is only 6mm not a bit lightweight? Quote Link to comment Share on other sites More sharing options...
landroversforever Posted October 15, 2021 Share Posted October 15, 2021 9 minutes ago, cackshifter said: Is only 6mm not a bit lightweight? They’re just templates to draw round Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted October 15, 2021 Author Share Posted October 15, 2021 4 hours ago, bishbosh said: Thank goodness! He's finally stopped worrying about flippin shock absorbers and gone back to making things! Hooray! 😛 33 minutes ago, cackshifter said: Is only 6mm not a bit lightweight? 23 minutes ago, landroversforever said: They’re just templates to draw round There's always a bunch of comedians in every forum.... 50 mm be thick enough for you.... Regards Stephen 2 2 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted October 15, 2021 Author Share Posted October 15, 2021 Completed one side today apart from fully welding precision height setting instruments Rounding off Closing in Welding Blending tacking into position I have to say a very time consuming process but one side down one to go regards Stephen 3 Quote Link to comment Share on other sites More sharing options...
Stellaghost Posted October 15, 2021 Author Share Posted October 15, 2021 5 hours ago, bishbosh said: Thank goodness! He's finally stopped worrying about flippin shock absorbers and gone back to making things! Hooray! 😛 Ahhh not quite, spoke to @discomikey today, he is kindly going to send me quotes for fox and profender ( which he uses on his race car ) shock absorbers, sorry to disappoint you @bishbosh Regards Stephen 2 Quote Link to comment Share on other sites More sharing options...
Wytze Posted October 15, 2021 Share Posted October 15, 2021 I'm loving the work you put in.. next phase in the project must be a diesel V8😁 1 Quote Link to comment Share on other sites More sharing options...
Anderzander Posted October 15, 2021 Share Posted October 15, 2021 25 minutes ago, Wytze said: I'm loving the work you put in.. next phase in the project must be a diesel V8😁 Made from solid with hand files and a Victorian English wheel. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.