Jump to content

dirtyninety

Settled In
 View Profile  See their activity

  • Posts

    868

  • Joined

  • Last visited

 Content Type 

Everything posted by dirtyninety

  1. dirtyninety
    I use QCAD (its free) for all my 2d drawing for plasma/laser/waterjet
  2. dirtyninety
    Your other expensive is going to be getting an NNN type ECU and having it de-immobed
  3. dirtyninety
    Knowing people that have tried to thin down a td5 disco looms... i wouldnt bother, besides defender looms are cheap on ebay!
  4. dirtyninety
    I have 2 front Y60 axles, and a rear Y60 axle, with LSD centre and spare LSD centre. £1000ono
  5. dirtyninety
    Added you on facebook Rien. You should try to attend some Ultra4 events before you buy anything. Chris
  6. dirtyninety
    Steve photos of your TPS? I've got a few kicking around and i'll post you one if i've got one the same. You going to enter any Ultra4 events this year?
  7. dirtyninety
    a friend of mine drove his 110 2.2 into a flood a few weeks ago. Only problem it had when i was towed out was a faulty gearbox sensor!
  8. dirtyninety
    The Surface tablets are pretty poor, if i were you I would sell it and buy a android tablet.
  9. dirtyninety
    imho the LR chassis doesn't lend itself to extreme suspension geometry. Also... it sounds like your spending far far to much money on an old discovery.
  10. dirtyninety
    Something loose inside the timing chest is my bet!
  11. dirtyninety
    fit the engine and gearbox/transferbox in one lump. It takes a bit of swearing but it saves laying on your back pushing a gearbox up. Done it many times!
  12. dirtyninety
    So what about machinery, tractors, plant and lorrys... are we going to have to go to electric... On another note, tractor MOT's are coming in shortly, and i presume a lot of the older tractors wont pass emissions or roadworthyness. Great for us in our new tractors with Adblue, but really really bad news for smaller farmers with old ropey tractors.
  13. dirtyninety
    Your RRC should drive like any other td5 defender or discovery. I think by modifying things your going to cause yourself many headaches!
  14. dirtyninety
    Bah who'd be into shiny road spec defenders anyway...
  15. dirtyninety
    Id loosen the bolts on the winch and if the winch/mount is distorted. if not, strip the winch, degrease the gearbox, then reapply some good quality grease, but not too much! We just did the same to a TDS winch, the freespool has never ever been so good since new!
  16. dirtyninety
    You're wondering which order the bolts go in? bolts 5 and 7 are M10x40 Bolt 8 is M10x45
  17. dirtyninety
    Its on it third battery, 2nd alternator and second starter motor in 2 months. Our local Land rover specialist have been taking my 84 year old Granddad for a right ride!! Managed to find the bit you have to poke to be able to shift to neutral. Now at an auto electricians.
  18. dirtyninety
    My grandads freebie2 is dead, proper dead. I'm going to trailer it to a auto electrician to have them sort it. But how on earth do I get the auto shifter out of "park" so I can load it onto my trailer? 09 reg 2.2 diesel auto with a manual handbrake.
  19. dirtyninety
    http://www.ashcroft-transmissions.co.uk/mt82-output-shaft-kit.html
  20. dirtyninety
    the MT82 gearbox uses a TUD500020 There isn't one on lt77/r380 etc
  21. dirtyninety
    My friend has a screw driver welded to and poking directly up from the diff lock. simple!
  22. dirtyninety
    The defender appears to have had the EGR valve removed at a guess, this is a good thing!
  23. dirtyninety
    Lots of people use rod ends in a-frame applications, on a land rover you need to use bigger joints!
  24. dirtyninety
    is it not this? http://www.island-4x4.co.uk/power-steering-hose-pump-qep105760-p-1266.html
  25. dirtyninety
    degrease it, give it a little bit of a V groove, and lay some mig down.
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept